Little touches make a difference

[Johnny Mo]

Did mine with reflective vinyl and my daughter's cricut. It's not perfect and the reflective vinyl doesn't cut thru easily, so weeding it is a pain in the ass. Each letter has to be placed separately and then use a heat gun to lock in place - which isn't ideal with reflective either. Still toying with the idea of just doing it with epoxy I'll have to mix up some colors first and see what I like best. I like the idea of the reflective - maybe can add some reflective dust on top of the epoxy once it's starting to tack up.

Sponsored

 

[ThatWilsonGuy]

Did mine with reflective vinyl and my daughter's cricut. It's not perfect and the reflective vinyl doesn't cut thru easily, so weeding it is a pain in the ass. Each letter has to be placed separately and then use a heat gun to lock in place - which isn't ideal with reflective either. Still toying with the idea of just doing it with epoxy I'll have to mix up some colors first and see what I like best. I like the idea of the reflective - maybe can add some reflective dust on top of the epoxy once it's starting to tack up.

Mind sending the circut file to me?

 

[ThatWilsonGuy]

Mind sending the circut file to me?

Did mine with reflective vinyl and my daughter's cricut. It's not perfect and the reflective vinyl doesn't cut thru easily, so weeding it is a pain in the ass. Each letter has to be placed separately and then use a heat gun to lock in place - which isn't ideal with reflective either. Still toying with the idea of just doing it with epoxy I'll have to mix up some colors first and see what I like best. I like the idea of the reflective - maybe can add some reflective dust on top of the epoxy once it's starting to tack up.

Just finished mine using Cricut, not perfect either but pretty close and honestly close enough as with my traction boards mounted, no one is ever going to see it .

 

[derichio02]

Just finished mine using Cricut, not perfect either but pretty close and honestly close enough as with my traction boards mounted, no one is ever going to see it .

Looks good! There is a traction board mount? Who makes it?

 

[ThatWilsonGuy]

Looks good! There is a traction board mount? Who makes it?

There may be others but Pura Vida Off-road is what I have.

Tucks them up into the hard top and if the traction boards themselves didn't sag slightly, you wouldn't even see them out the rear view.

but https://puravidaoffroad.com/

 

[DewarT]

Just finished mine using Cricut, not perfect either but pretty close and honestly close enough as with my traction boards mounted, no one is ever going to see it .

Want to share that CriCut file??

 

[Johnkn]

Are the quality letters commercially available?

thanks

.

 

[Johnkn]

Any word whether quality insert letters in available?

thanks
.

 

[Johnkn]

Is the 'Ford Performance' lettering available anywhere?

thanks

,

 

[Johnny Mo]

Is the 'Ford Performance' lettering available anywhere?

thanks

,

It is not

 

[SkyKing]

I give up - what am I looking at?

 

[Johnkn]

I give up - what am I looking at?

The Ford Performance lettering on the rear hoop. Post #52


.

Sponsored