Method OFFSET???

[CrankAddictRich]

There are +30 Methods (stock Sasquatch offset) but I think they're only the 703s from Ford or the RTR wheels. Solid guarantee they'll fit, but style is of course quite different.

RTR wheels are 0 offsett

Sponsored

 

[Smocaine]

RTR wheels are 0 offsett

We're both right - they are available in 0 or +30 offset!

 

[CrankAddictRich]

We're both right - they are available in 0 or +30 offset!

Hahaha.. You're right.

 

[solracarevir]

I'm not necessarily asking about the poke... I understand that. I'm more concerned with the clearance when you turn the front wheels. If it sticks out more, then it has potential for rubbing the back of the wheels arch where a mud flap would be.

I'm Running negative offset tires (-10mm) on a Non lifted Sasquatch Black diamond. No fitment issues whatsoever, no rubbing, no nada, and I have done offroad on with with no issues.

You'll be fine with 0.

 

[Enginerd]

Regarding mud flaps, since I went 0 offset I reached out to Rokblokz and they sent me the following guidance. Note, I also stayed with 35's but MT Baja Boss A/T.

Hope this helps.

https://rokblokz.com/blogs/news/faq...Xc67V_s8EpiGxjoVXjc07W7Cz6Wf26GIUIk8CKjHW5fY7

 

[CrankAddictRich]

Regarding mud flaps, since I went 0 offset I reached out to Rokblokz and they sent me the following guidance. Note, I also stayed with 35's but MT Baja Boss A/T.

Hope this helps.

https://rokblokz.com/blogs/news/faq...Xc67V_s8EpiGxjoVXjc07W7Cz6Wf26GIUIk8CKjHW5fY7

Did you need to do this? It is confusing to me that some people say that a 0 offset absolutely works with no issues, while others claim it rubs.

I could possibly understand why you might need to do this with this mud flaps given the large bracket, but wen still, it doesn't look like there was actually an interference issue.

 

[Sardine]

I got you lmao. This is literally my setup. I have Falken AT3Ws though. I have a non sasquatch badlands and nothing rubs but I haven't done any really crazy articulation yet.

So, Method 706 at 17x8.5 0 offset and At3W at stock size of 315/70/17

 

[JL8jeff]

Did you need to do this? It is confusing to me that some people say that a 0 offset absolutely works with no issues, while others claim it rubs.

I could possibly understand why you might need to do this with this mud flaps given the large bracket, but wen still, it doesn't look like there was actually an interference issue.

It depends on the style of mud flap. Some of them have a raised edge for extra strength and that is where mine where hitting with true 35's.

Here is my truck with the mud flap ground down along the raised edge on the inside of the flap. It would still rub when backing up an incline with the wheel fully turned. My driveway is sloped so it happened a lot. The mud flaps that angle straight back will probably be fine, but this style that drops down will rub.

 

[Sloth]

No clearance or rubbing issues running Method 706 w 0 offset and stock size 315/70 tires and RokBlokz flaps. I did have to remove the brackets from behind the fender liners as directed in the video.

Sponsored