NEW Flashcal+ Bronco Support!

[Superchips_Mktg]

I don't see brake hold on the menu. I referring to the ability for the vehicle to keep the brakes on when at a stop without having to continue to press the brake pedal.

Its on the list for engineering to 'please add if possible'

Sponsored

 

[Superchips_Mktg]

Apparently it does not support a 22 Badlands with 2.3L with 7sp.

None of the options work. Attempted them all after update, restarted phone, turned off Bronco and back on (accessory only in ignition)

Nothing support, hopefully I can get in contact with tech support.

Please give us a call when you can, 407-585-7000, likely something simple going on here.
If you can submit the bug report through the app it would help as well.

 

[Superchips_Mktg]

Fairly certain I did but that is the one thing I did not double check. Appreciate the reminder on checking that.

Forced it to do the update again and it appears to have been successful and allowing changes to be made.

Glad to hear it.

 

[Superchips_Mktg]

So, I received mine Friday afternoon. From then until last evening I have made numerous attempts to disable fake engine noise, double press for the panic alarm, add goat modes (Baja and rock crawl), and seat belt chime off.
I have uploaded the device update twice and takes multiple attempts to change a parameter without getting some sort of error message on the app, and once a brake failure message on the dash.
So far the only thing that has taken effect is Baja mode (I removed rock crawl) and double press for the panic button. All of the changes I mentioned previously indicated that the settings have been saved to the vehicle after I pressed the upload button.
I cannot tell any difference in sound so I assume fake engine noise did not disable.
I will do the seat belt chime mute the old fashioned way by manually locking and releasing the buckle five times with the ignition in the run position.
This all leaves me with one change that actually took which was the double press. I don't really care about Baja mode.
So as it stands, double press is the only real useful change that works, and I originally fixed that problem with. $1.50 carabiner.

Please reach out to our team if possible, 407-585-7000, we'll get you sorted out.

 

[Superchips_Mktg]

To clarify on the included bypass module...

it is specific for use on Jeep JL/JT applications and can be discarded by Bronco owners

Newer instructions stating this are in the packages shipping currently.

 

[2025Southbound2dr]

I tried the tire size wizard and the computed tire size came out to 31.65 (I have 33's), reported tire size 29. This morning at vehicle start up I get a "Check 4x4" error on dash followed by "Service Vehicle Soon". I tried manually entering tire size (255/85/16) and still had the error messages. I tried to clear the messages but each time I cleared it the error would show. Hoping for a call back been waiting over an hour so far. Anyone else going through this?

 

[Tybh88]

I tried the tire size wizard and the computed tire size came out to 31.65 (I have 33's), reported tire size 29. This morning at vehicle start up I get a "Check 4x4" error on dash followed by "Service Vehicle Soon". I tried manually entering tire size (255/85/16) and still had the error messages. I tried to clear the messages but each time I cleared it the error would show. Hoping for a call back been waiting over an hour so far. Anyone else going through this?

Same. It says my speedometer recalibrate is disabled and won't let me enable it. Im not sure if this is the source or not. My rewrites end up with errors or timed out. My speedometer is 2mph faster than GPS speed. other changes have worked flawless. Hopefully this is a quick fix

 

[chopperbobby]

Yes, I removed rock crawl and it went away.

So did you get a parking brake service light when u added baja and then removed rock craw and the parking brake warning went away?

 

[2025Southbound2dr]

Same. It says my speedometer recalibrate is disabled and won't let me enable it. Im not sure if this is the source or not. My rewrites end up with errors or timed out. My speedometer is 2mph faster than GPS speed. other changes have worked flawless. Hopefully this is a quick fix

Let's hope. I'm still waiting on a call back.

 

[chopperbobby]

I think i am done for now just did the panic 2 button and engine noise all went good.
baja goat gave parking brake service.
wait for bugs to be worked out

 

[Gregc57]

I’m thinking of buying this……
after you beta testers get it sorted, of course.
good luck to all,

 

[Nick72]

So did you get a parking brake service light when u added baja and then removed rock craw and the parking brake warning went away?

It flashed on the instrument screen when I added the goat modes and hit upload. When cycling through the goat modes afterwards, rock crawl was not listed, but it seemed to be there, just blank. I turned the goat dial back and Baja displayed. Back to rock crawl and again it seemed to activate but the screen was blank. So I just removed rock crawl and no brake warning and all goat modes display as normal.
I'm done messing with it until the bugs are worked out.
To say I'm disappointed is an understatement at this point.

 

[Nick72]

I think i am done for now just did the panic 2 button and engine noise all went good.
baja goat gave parking brake service.
wait for bugs to be worked out

Was disabling the fake engine noise a noticeable difference?
I disabled mine but I can't tell difference, so I don't think it worked.

 

[Tybh88]

Please reach out to our team if possible, 407-585-7000, we'll get you sorted out.

Do yall have a fix for these bad speedometer rewrites causing fault codes?

 

[Superchips_Mktg]

Do yall have a fix for these bad speedometer rewrites causing fault codes?

The team is actively investigating. I am confident it will be a quick fix.

Sponsored