NEW PRODUCT | Diode Dynamics Capable Bumper Dual Fog Kit from KR Off-Road

[RC Bronco]

Curious about the backlight control wire(s) for both harnesses - can both of those control wires go to the battery so that they're always on when the vehicle is on (instead of to another aux switch)? Would there be any downside to that?

Sponsored

 

[4x4TruckLEDs.com]

Curious about the backlight control wire(s) for both harnesses - can both of those control wires go to the battery so that they're always on when the vehicle is on (instead of to another aux switch)? Would there be any downside to that?

Yes you could use a fuse tap with your fuse panel under the hood (add a fuse).

The only down side is you can't turn it off without turning truck off.

 

[Papa Smurf]

Is there an option to only get 1 set of lights? I already have a set of SS3 Pros that k got from you for the standard bumper. I recently found a Capable to upgrade to.

 

[4x4TruckLEDs.com]

Is there an option to only get 1 set of lights? I already have a set of SS3 Pros that k got from you for the standard bumper. I recently found a Capable to upgrade to.

Eventually you'll be able to buy everything ala carte if you want

 

[4x4TruckLEDs.com]

Is there an option to only get 1 set of lights? I already have a set of SS3 Pros that k got from you for the standard bumper. I recently found a Capable to upgrade to.

You can pre-order it here: https://www.4x4truckleds.com/kr-off...brackets-for-2021-ford-bronco-capable-bumper/

 

[iBrad81]

Curious is there a need for the backlit or is it just for looks?

 

[4x4TruckLEDs.com]

Curious is there a need for the backlit or is it just for looks?

just for looks

 

[4x4TruckLEDs.com]

For those who were at our open house this past weekend, you got to take a look at these brackets. They are now in production! We're hoping to have them in a few weeks.

Here's one of our employees showing these off to another Bronco owner (I think that's you Nate?)

 

[4x4TruckLEDs.com]

Woohoo! Our brackets are IN PRODUCTION! These were not easy to make let me tell you. It's taking 2 different machines to do the crazy bends for our brackets, but they'll be a 1 piece design which is fantastic! We're probably looking at the end of November but we're hoping to have these sooner (maybe 3 weeks possibly)

 

[Hutchem]

Got a pre-order on these will we be getting email updates on these?

 

[4x4TruckLEDs.com]

Got a pre-order on these will we be getting email updates on these?

Orders are expected to ship out this month. Hopefully sooner then later.

 

[4x4TruckLEDs.com]

Speak of the devil. Brackets just got back from paint. They are getting packaged for us for transport from the painter to our warehouse. We'll start getting pre-orders and new orders shipped out mid-week next week (figure Wednesday)

 

[Hutchem]

Sweet! I cant wait to get these on, it gives the finished look that the factory fogs on the capable bumper was missing, I never liked it, it looked like it was an afterthought and unfinished.

 

[4x4TruckLEDs.com]

Sweet! I cant wait to get these on, it gives the finished look that the factory fogs on the capable bumper was missing, I never liked it, it looked like it was an afterthought and unfinished.

Yeah these dual kits are awesome. Completely bolt on which is great.

 

[Matt J.]

Anyone have suggestions on what kind of lights to put in those positions? I already have a SS3 Pro SAE yellow fog kit, so definitely putting those in. But not sure what to use in the other slot. I guess the logical choice is the SAE driving lights, but is anyone considering something else like the floods or the flood/driving combo lights?

Sponsored