Now Available: Panda Motorworks 2021 + Ford Bronco Plug ’n Play Full Digital Dash Conversion Kit

[AbeFroman]

We can do that all for you! Install of the cluster is around 2 hours $265 from us!

Ford performance tune I think is around 1 hours for the device flash for us!

Are you ase certified for the tune warranty to be valid? I see you have your own tune, but Im thinking I want the Ford one with the warranty in case my engine blows up.

Do you sell their tune as well? I have the 2.7.

Would you be able to quote the whole thing for me?
-Cluster swap and labor ( I'll give you my old cluster core back)
-Ford Tune unit and install

I can also supply the ford tune unit if you just want to install it.

Thanks!

Sponsored

 

[chris@pandamotorworks]

Are you ase certified for the tune warranty to be valid? I see you have your own tune, but Im thinking I want the Ford one with the warranty in case my engine blows up.

Do you sell their tune as well? I have the 2.7.

Would you be able to quote the whole thing for me?
-Cluster swap and labor ( I'll give you my old cluster core back)
-Ford Tune unit and install

I can also supply the ford tune unit if you just want to install it.

Thanks!

Sent you a message!!

 

[RagnarKon]

You should find a new supplier.
Retail price is $928, there are even ford wholesale parts sites selling it for as low as $665 online

Regardless, very cool that you guys have got this to work and made this kit for everyone

I can't even find a listing for the braptor cluster online. All the ones that say they are well are not as the part #'s don't match up.

These have a $250 core charge as well included in the price you can get back.

Trust me I wish Ford OEM clusters were cheaper but they aren't at this time.

Not seeing that personally, the price I see matches what @Ducati1098 sees.

• 2022 Cluster: N2DZ-10849-A (currently ~$1050)
• 2023+ Cluster: N2DZ-10849-C (currently ~$930)

And of course can be found much cheaper than that online at wholesale part sites.

 

[chris@pandamotorworks]

Not seeing that personally, the price I see matches what @Ducati1098 sees.

• 2022 Cluster: N2DZ-10849-A (currently ~$1050)
• 2023+ Cluster: N2DZ-10849-C (currently ~$930)

And of course can be found much cheaper than that online at wholesale part sites.

Those aren't the correct part #'s and would not come as a full digital dash.

 

[XirallicBolts]

it sounds like these are embedded in the unit itself and there most likely isn’t any provisions for “lesser than” models.

As hard as Panda may try, I think there will always be some graphical compromise with this swap, atleast for the time being

If we're lucky, a future refreshed Bronco will use this instrument cluster. If so, maybe they're already programming in 'non-Raptor' stuff -- similar to how Sync had the Bronco boot animations long before the Bronco was being manufactured. That or perhaps a future firmware could be flashed to current Raptor hardware.

 

[Ducati1098]

Those aren't the correct part #'s and would not come as a full digital dash.

Those are the only part numbers listed according to the Ford parts catalog using Raptor VINs.

 

[chris@pandamotorworks]

Those are the only part numbers listed according to the Ford parts catalog using Raptor VINs.

And it's wrong you can't get the digital dash without a core and both of those say n/a

They are not correct.

All power to anyone that can figure it out and do it cheaper but I can assure you the dash is not under $1k from Ford

 

[swooshdave]

Nice job. Must have been a pain to get all the programming done.

I’m in the “wait for the refresh and then decide” camp.

 

[FstFrd00]

I like but Mr. Budget says "not right now"

 

[Haelous]

I love this and was waiting for it but the price is just a bit too much. Budget is making me choose between a BBK on my Mustang and the digital dash on my Bronco.

BBK in the spring is a big upgrade.

 

[3People1Body]

Mabett will be making these for $550 soon... gotta love chinese competition.

 

[Ducati1098]

And it's wrong you can't get the digital dash without a core and both of those say n/a

They are not correct.

All power to anyone that can figure it out and do it cheaper but I can assure you the dash is not under $1k from Ford

Just because the core price isn’t listed doesn’t make it incorrect. The core price simply isn’t listed in the catalog.
If they aren’t correct feel free to post the part that you received from Ford.

 

[chris@pandamotorworks]

Just because the core price isn’t listed doesn’t make it incorrect. The core price simply isn’t listed in the catalog.
If they aren’t correct feel free to post the part that you received from Ford.

Or you could order one of those and find out it's not correct. I have no reason to lie about the true cost. Trust me I wish this was sub $2k I know how many more we could sell but it's simply impossible because of the OEM display cost

 

[Ducati1098]

Or you could order one of those and find out it's not correct.

Seems easier to just post the correct part number if you have it, but okay.

 

[BigMeatsBronco]

The price is fair because it takes so much time to answer all the dumb questions and convince the Karen's they don't need geeko mode, plus try to market these....and then troubleshoot them later...

OP How are you going to provide OTA updates? please provide proof you can do this?

truth is $50 FDRS PMI and configuration, and then $12 forscan will do this ...

@jesse-Infotainment
already did this swap and posted the only bummer was the goat modes were wonky.

you can change the ABS module in yer stock normal Bronco to accept most of rhe Braptor ABS asbuilts.

Sponsored