- Joined
- Aug 24, 2020
- Threads
- 14
- Messages
- 302
- Reaction score
- 987
- Location
- North Dakota
- Vehicle(s)
- '16 Ram 2500, '18 F150
- Your Bronco Model
- Base
Ordered!
Sponsored
If not, there are instructions on their website that includes that information.there should be a packing list, or parts list in the instructions. I'm saying "should be" not because I bought these, but only because of other purchases.
I'd go through the parts, count the hardware, and see about procuring any missing pieces well before I started the install.
Well, I say that, but I know I actually wouldn't do that because I'm a big procrastinator. I'd just wing it, run to the hardware store while rushing to install the parts before I needed the car again, all the while kicking myself for not preparing beforehand.
Dumb question: Did you install these without having to put it on a lift?I just finished putting mine on today. Please forgive the messy Bronco...that's its natural state; a bit of mud and mag chloride from the recent snow.
Install was pretty easy for the most part. The passenger side was a little more difficult because of the gas tank/skid in those locations; also not helped by needing to wedge my American-sized body underneath to secure the bolt behind the front of the gas tank skid.
After reviewing the instructions, I don't see why you couldn't. I did the ones on my old 4Runner without one. Probably a good floor jack and jack stands needed.Dumb question: Did you install these without having to put it on a lift?
Yep, but I did use a pair of jack stands to hold it up since I was by myself.Dumb question: Did you install these without having to put it on a lift?
@Administrator - If you ask me I’d say this is newsworthy. Lots of folks have been waiting for RCI’s 2Door sliders to go live.
https://rcimetalworks.com/product/2-door-rock-sliders-21-present-bronco/
That’s my Eruption Green Bronco on their product page! (Truck nerd moment) RCI used my truck to confirm fitment on the 2023 2door. Fit & finish is top notch. I live nearby and offered to help as 2doors are pretty scarce around here.
20°On the product pictures are yours the 20 or 5 degree ones.
I installed mine by myself in my shop on the ground. I used two jack stands to position them close to the frame and then lifted and bolted up the front end and then work my way back. Very easy install for me.Dumb question: Did you install these without having to put it on a lift?
I installed mine by myself in my shop on the ground. I used two jack stands to position them close to the frame and then lifted and bolted up the front end and then work my way back. Very easy install for me.
Since we have the factory gas tank skid, I removed the three bolts on the frame side and had to pry the skid plate down slightly to get the slider mounting plate between the frame and tank skid.
Lookin good!@Administrator - If you ask me I’d say this is newsworthy. Lots of folks have been waiting for RCI’s 2Door sliders to go live.
https://rcimetalworks.com/product/2-door-rock-sliders-21-present-bronco/
That’s my Eruption Green Bronco on their product page! (Truck nerd moment) RCI used my truck to confirm fitment on the 2023 2door. Fit & finish is top notch. I live nearby and offered to help as 2doors are pretty scarce around here.