Replacement Bolts for Heavy Duty Modular Front Bumper?

[JdH23OBX]

https://www.ruxerparts.com/oem-parts/ford-end-cap-bolt-w721180s450b

https://www.ruxerparts.com/oem-parts/ford-reinforcement-bolt-w721447s900


The W72221447-S900 is the bolts marked as HB4, M8 X 23MM. The first link is the bronco bolts marked as HB3 in the pic. and M8 X 30. I really don't think 7mm is going to make much of a difference in the grand scheme of things.

Just realized I somehow lost a bolt on my front bumper. Are the bolts I circled in yellow the HB3 and the ones circled in red the HB4? The one circled in red has a washer and the one circled in yellow does not have a washer with it.

Sponsored

 

[flip]

W721180-S450B is HB3. HB3 is 30mm long, HB4 is 23mm.

 

[JdH23OBX]

W721180-S450B is HB3. HB3 is 30mm long, HB4 is 23mm.

Just to confirm before I place an order with you is that the HB3 (W721180-S450B) is the bolt below circled in red and is 30mm long and has a washer with it. The hole below circled in yellow that is missing the bolt is for the HB4 (W72221447-S900) and that is 23mm long with no washer.

 

[flip]

Just to confirm before I place an order with you is that the HB3 (W721180-S450B) is the bolt below circled in red and is 30mm long and has a washer with it. The hole below circled in yellow that is missing the bolt is for the HB4 (W72221447-S900) and that is 23mm long with no washer.

If you want the one with captive washer, go with the HB3 W721180-S450B.

HB3

HB4

 

[JdH23OBX]

If you want the one with captive washer, go with the HB3 W721180-S450B.

HB3

HB4

Perfect....thank you. Will probably order some with and without the washer.

 

[GreenVibesOnly]

Does anyone know of a way to get longer versions of HB1? 6 of these hold the bumper on, and 4 of them go through my winch mount. The mount + spacers + frame brackets adds about 0.75” of grip length needed.

I assume Ford would not have these since it’s not for a configuration they sell. But ideally I’d want the same pedigree (strength, finish, etc.) I believe they are M12-1.75 66mm, and I would need 80mm long. Bolt head indicates rating of 10.9

 

[thenewjs]

Does anyone know of a way to get longer versions of HB1? 6 of these hold the bumper on, and 4 of them go through my winch mount. The mount + spacers + frame brackets adds about 0.75” of grip length needed.

I assume Ford would not have these since it’s not for a configuration they sell. But ideally I’d want the same pedigree (strength, finish, etc.) I believe they are M12-1.75 66mm, and I would need 80mm long. Bolt head indicates rating of 10.9

McMaster Carr?

 

[GreenVibesOnly]

McMaster Carr?

Thanks for the reminder! Hadn't bought from them in a couple years and didn't come to mind. They do have some promising stuff. I had found what "looked" right on Amazon, but I didn't trust any of it to be what it says for such a critically-loaded application. At least McMaster has drawings and specifications listed. Ordered! Now I'll just be without a bumper until Monday afternoon.

Sponsored