Fast Intentions bracket. S2 and wiring from 4x4LED.
S1 in the trailer hitch for reversing. All controlled by aux 5/6.
S1 in the trailer hitch for reversing. All controlled by aux 5/6.
Sponsored
Sponsored
I'm not sure. The harness supplied plugs in between the 7 pin factory wiring and 7-pin plug. It would work you just may have to hard wire the light instead of plugging it in.
- First Name
- Mike
- Joined
- Sep 17, 2020
- Threads
- 2
- Messages
- 490
- Reaction score
- 676
- Location
- California
- Vehicle(s)
- 2022 Bronco Raptor
- Your Bronco Model
- Raptor
That is exactly what I’m doing. Install starts tomorrow (plus a lot more lighting up front).Fast Intentions bracket. S2 and wiring from 4x4LED.
S1 in the trailer hitch for reversing. All controlled by aux 5/6.
- First Name
- Eric
- Joined
- Dec 7, 2022
- Threads
- 1
- Messages
- 40
- Reaction score
- 223
- Location
- Warner Robins, GA
- Vehicle(s)
- ‘22 Ford Bronco
- Your Bronco Model
- Base
Here is mine. Made a simple L bracket to mount on the frame cross member to pick up the existing trailer hitch mounting holes (I dont have a hitch) and mounted a cheap Raxiom 14” super slim dual row LED bar. Cheap and works pretty good. This isnt the brightest light option out there, but it definitely works for this application.
Sponsored
