Sneak Peak: KR Off-Road 30" Slim Light Bar & 40" Baja Designs OnX6+ Light Bar Mount

[4x4TruckLEDs.com]

This system also allows the Diode Dynamics 30" Stage Series bar to be installed as well. Here's a shot of that installed along with the easy access you have to the side bolts so you can align your bar properly without trying to align it first/then mount the entire assembly. SOOOO easy install. Takes about 1 minute per side.

Sponsored

 

[4x4TruckLEDs.com]

We're now accepting pre-orders on our new mounting kits with and without light bars: https://www.4x4truckleds.com/kr-off-road-30-bumper-light-bar-mount-for-2021-ford-bronco/

 

[4x4TruckLEDs.com]

Buddy the Elf: "YOU DID IT!"

Ohhhh my goooodness. This is FRIGGIN AWESOME! This is the Baja Designs Dual Control 40" Arc bar on our Bronco. The outer amber (yellow output) lights are on one switch with the inner white lights on a different switch (also available as a 40" single color, amber or white).

Mounted these to, you guessed it, our new KR Off-Road brackets we just developed last week (bar came in today).

NOT a cheap solution by any means (you're talking $1,750 just for the light bar) but MANNNN this baby is SWEEEEEET

 

[SnowBronco]

We're now accepting pre-orders on our new mounting kits with and without light bars: https://www.4x4truckleds.com/kr-off-road-30-bumper-light-bar-mount-for-2021-ford-bronco/

Do the Baja and diode lights bars both have dual amber and white? The description of each of these makes it sound this way? Thanks!

 

[4x4TruckLEDs.com]

Do the Baja and diode lights bars both have dual amber and white? The description of each of these makes it sound this way? Thanks!

No they do not. Only Baja Designs offers a Dual Control bar.

 

[SnowBronco]

No they do not. Only Baja Designs offers a Dual Control bar.

Which model number is this? Cause more than. One says combo, then amber in the same sentence. Lol

 

[Raptor911]

can you show a side profile? I want to see how far the bar sits over the edge of the mod bumper. Thank you!

Buddy the Elf: "YOU DID IT!"

Ohhhh my goooodness. This is FRIGGIN AWESOME! This is the Baja Designs Dual Control 40" Arc bar on our Bronco. The outer amber (yellow output) lights are on one switch with the inner white lights on a different switch (also available as a 40" single color, amber or white).

Mounted these to, you guessed it, our new KR Off-Road brackets we just developed last week (bar came in today).

NOT a cheap solution by any means (you're talking $1,750 just for the light bar) but MANNNN this baby is SWEEEEEET

 

[4x4TruckLEDs.com]

Which model number is this? Cause more than. One says combo, then amber in the same sentence. Lol

I don't understand what you mean. This is a Baja Designs 40" OnX6+ Dual Control Arc Bar, which is normally Amber Wide Cornering and White Spot out of the box, but you can install any lenses (on here we have Driving/Combo for both amber and white)

https://www.4x4truckleds.com/baja-designs-onx6-40-arc-dual-control-amber-white-led-light-bar/

You can swap lenses out with Baja Designs.

The non-Dual control Arc bar is available in various patterns: https://www.4x4truckleds.com/led-light-bars/baja-designs/onx6/arc-series/

 

[Raptor911]

https://www.bajadesigns.com/products/OnX6-Dual-Control-Amber-White-LED-Light-Bar.asp

Which model number is this? Cause more than. One says combo, then amber in the same sentence. Lol

 

[4x4TruckLEDs.com]

can you show a side profile? I want to see how far the bar sits over the edge of the mod bumper. Thank you!

I will later once we get some of these orders out the door

 

[FATHORSE]

do you have something that will fit this crazy Canadian bull bar?
I thought it was a cool design element, but it has been doing me wrong as far as light mounts.

 

[4x4TruckLEDs.com]

do you have something that will fit this crazy Canadian bull bar?
I thought it was a cool design element, but it has been doing me wrong as far as light mounts.

Sorry not familiar with that bar. I can't tell you for certain if our system will work because of that little corner piece. It might fit though

https://www.4x4truckleds.com/kr-off-road-30-light-bar-bumper-mount-for-2021-ford-bronco/

Our brackets might fit around that little corner piece

 

[4x4TruckLEDs.com]

can you show a side profile? I want to see how far the bar sits over the edge of the mod bumper. Thank you!

Here is the side profile. The bracket is a 3D printed prototype. I'm going to be slimming it down and tapering it. This allowed me to see how it fit before I focused on aesthetics.

 

[SnowBronco]

I don't understand what you mean. This is a Baja Designs 40" OnX6+ Dual Control Arc Bar, which is normally Amber Wide Cornering and White Spot out of the box, but you can install any lenses (on here we have Driving/Combo for both amber and white)

https://www.4x4truckleds.com/baja-designs-onx6-40-arc-dual-control-amber-white-led-light-bar/

You can swap lenses out with Baja Designs.

The non-Dual control Arc bar is available in various patterns: https://www.4x4truckleds.com/led-light-bars/baja-designs/onx6/arc-series/

My bad. I was hoping you were talking about the 30" I quoted to work with the safari bar.

 

[4x4TruckLEDs.com]

My bad. I was hoping you were talking about the 30" I quoted to work with the safari bar.

I wasn't sure what you were talking about. The S8 bars and Stage Series bars are not offered in a dual control/dual color bar.

Sponsored