- Thread starter
- #1
Have some backlights on my LP9s and am looking at tapping the DRL for that as they draw basically nothing. Anyone done this yet and know where the wire runs is etc?
Sponsored
Would you have a diagram of the drl feed @ the c203 connector or do they not run through there? I have a light bar with drl feature that I only want in with the drlās. With the winch mount itās a pain in the rear to get my grill off.The diagrams above are for parking lights. I can snap a pic of the diagram for DRL. Was just thinking parking lamps was a more desirable method to connect backlights.
The above pics should be what you need.Would you have a diagram of the drl feed @ the c203 connector or do they not run through there? I have a light bar with drl feature that I only want in with the drlās. With the winch mount itās a pain in the rear to get my grill off.
I took the lazy way out.... SPV Parts Harness Bronco Parking/Headlight Connector Adapter (Powers Aftermarket Backlights w/ Parking/Markers)-SPV Harness System (Works w/ MANY vehicles) Ć 1 |
Thank you. Iāll get out and verify this helps a ton.The above pics should be what you need.
So it looks like the passenger DRL wire should be violet and white, correct?
Awesome, thank you!!@Jfoster05 this may help with wiring up your lightshield pro