The Chronicles of CHEETO (Cyber Orange Bronco Build)

[shoelessjoe]

You talking about plates? I thought about it briefly, but thought it would be too much. Be cool if I only had to run a rear plate.

We only have to run a rear plate in Michigan.

Sponsored

 

[GToddC5]

2/27/22 - One of my hobbies is bikes. I mostly have GT cruiser bikes, but also some built by the OG Gary Turner and his son Craig Turner, among others. On this day I selected a few to see which bikes I could stuff into the 2 door, for fun. I would have never guessed that I could get a 29er in there!

I started with the 20" 1987 GT Performer - Piece of cake with just the rear seats folded normally:

This 26" 2020 GT Reunion bike needed the passenger rear seat bottom folded under the seat back, the head rest flat and the front seat pushed up:

Same deal with this 29" 2019 GT Street Performer:

 

[GToddC5]

For anyone wondering about the AMBULL Shackles and color match, I'd say it's mostly close to the Badlands Active Orange accents:

 

[GToddC5]

This is a mixed post showing some StickerFab items, Bartact Handles and Fast Intentions Sill Guards. I ended up getting another set of Bartact Handles later, for the rear (there's a great spot for them even in the 2 Dr.)

 

[Razorbak86]

Great job, Todd.

Now you need a Funko Pop! Chester Cheetah figurine on your BYOD rail.

 

[GToddC5]

Greta job, Todd.

Now you need a Funko Pop! Chester Cheetah figurine on your BYOD rail.

Holy crap! It's cheap, and #77 which has my favorite number!
I can't believe I'm actually hovering over the add to cart button . . .

 

[Razorbak86]

Holy crap! It's cheap, and #77 which has my favorite number!
I can't believe I'm actually hovering over the add to cart button . . .

Send it!

 

[Meraki Hammocks]

Chester would be proud.

 

[GToddC5]

6/04/22 - Installed JCR Tube Doors. No written/printed instructions included, but they have a YT video that I'll link to at the bottom. Install was pretty straight forward, but I had to tweak the latch brackets quite a bit to ensure engagement. They could help with this by having horizontal slots to allow for this, but I just went ahead and bent mine. I also had sizeable gaps between the bottom hinge bracket and their nylon spacer which kept me from being able to screw in the factory bolt with their washer on top of the bracket. So, I moved the washers and used them to fill in the gaps (I may look into longer bolts to see if I can cinch them down to pull the brackets down). Small amounts of rub from packaging/transit, but hey - they are powdered black and very easy to touch up with a matte black paint.

Then I added a little pop to the JCR logo:

^ Funny story - I don't have the Sasquatch package, but I discovered recently that Ford stuck this Squatch one on the driver side, and the correct non-Squatch on the passenger side!

And here's the install video:

 

[shoelessjoe]

This is a mixed post showing some StickerFab items, Bartact Handles and Fast Intentions Sill Guards. I ended up getting another set of Bartact Handles later, for the rear (there's a great spot for them even in the 2 Dr.)

What color are the Fast Intentions Sill Guards?

 

[F OR D]

give us more

 

[GToddC5]

What color are the Fast Intentions Sill Guards?

 

[shoelessjoe]

Thanks

 

[Bronco21fan]

2/27/22 - One of my hobbies is bikes. I mostly have GT cruiser bikes, but also some built by the OG Gary Turner and his son Craig Turner, among others. On this day I selected a few to see which bikes I could stuff into the 2 door, for fun. I would have never guessed that I could get a 29er in there!

I started with the 20" 1987 GT Performer - Piece of cake with just the rear seats folded normally:

This 26" 2020 GT Reunion bike needed the passenger rear seat bottom folded under the seat back, the head rest flat and the front seat pushed up:

Same deal with this 29" 2019 GT Street Performer:

Nice bikes my nephew is getting a se so cal. Flyer for his birthday in July my bro has it hidden . I’m prob either going to get a se d blocks ripper or a se big flyer like the perry Kramer ripper as well. It that’s a 27.5 think I’m going to get a 29

 

[GToddC5]

Nice bikes my nephew is getting a se so cal. Flyer for his birthday in July my bro has it hidden . I’m prob either going to get a se d blocks ripper or a se big flyer like the perry Kramer ripper as well. It that’s a 27.5 think I’m going to get a 29

Cool! I never really got into the SE stuff, but they're nice, no doubt. I like building them up from frame sets the most. My pride and joys are a custom 2018 CTK (Craig Turner Kustom) 29" Bolt frame set, and a custom 2020 S&M COVID Cruiser 29" that I built up.

@Bronco21fan Edit to add pics, because why not:

2018 CTK Bolt 29

2020 S&M COVID Cruiser 29

Sponsored