What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[andrusoid]

Can you confirm the 72-7902 adaptors worked for your front and roll bar speakers?

No, it's hard to see, but it looks as though they have the correct Molex connectors. Somewhere on this forum someone shows the correct Molex connector and how to crimp, insert pins, etc. I just can't find it.

What I did end up doing was using a pair of dikes to make 3 cuts on the "wrong" connectors and prying off part of the side so I could mate the pins on the plugs with the socket side receiver pinholes.

Sponsored

 

[SubmarineNuke]

It might seem small…but sometimes it’s the small details that matter. The wife thinks I’m crazy. Bronco valve caps for the tires

If anyone is curious here’s the link
Ford Bronco Black ABS Plastic Tire Valve Stem Cap Covers (Pack of 5) https://smile.amazon.com/dp/B096CDF...i_i_1PG6AGH8NJFHBPV77ZH1?_encoding=UTF8&psc=1

 

[TenSeven]

I was missing the "Your Steering Wheel Is Straight Up" stripe that was on the wheel of my Raptor, so:

I may have to redo it, on camera it looks to angled left a skosh.

 

[EMBronco]

No, it's hard to see, but it looks as though they have the correct Molex connectors. Somewhere on this forum someone shows the correct Molex connector and how to crimp, insert pins, etc. I just can't find it.

What I did end up doing was using a pair of dikes to make 3 cuts on the "wrong" connectors and prying off part of the side so I could mate the pins on the plugs with the socket side receiver pinholes.

I made my own, here is what you need.
Housing:
31067-1041 Molex | Mouser
Pins:
204226-1001 Molex | Mouser

I think these are the connectors you were referring to.

 

[Strykerwsu]

Added the RucRack. Really well engineered. They could add a bit more protection in shipping, a few marks but overall Powdercoat held up.

Can't wait to hit the lake.

 

[Bt_ostate]

It might seem small…but sometimes it’s the small details that matter. The wife thinks I’m crazy. Bronco valve caps for the tires

If anyone is curious here’s the link
Ford Bronco Black ABS Plastic Tire Valve Stem Cap Covers (Pack of 5) https://smile.amazon.com/dp/B096CDF...i_i_1PG6AGH8NJFHBPV77ZH1?_encoding=UTF8&psc=1

Had those and replaced with these aluminum ones. Didn't like the cheap plastic.
https://www.cjponyparts.com/valve-s...bLudPiVC72aaJTXnhgSHuKC6WPiHurqhoC_pkQAvD_BwE

 

[roofone2]

Can you confirm the 72-7902 adaptors worked for your front and roll bar speakers?

Looks like there’s a B6G member selling some custom made ones: https://www.ebay.com/itm/334432880134.

 

[SubmarineNuke]

Had those and replaced with these aluminum ones. Didn't like the cheap plastic.
https://www.cjponyparts.com/valve-s...bLudPiVC72aaJTXnhgSHuKC6WPiHurqhoC_pkQAvD_BwE

if that was a 5 pack it’d be perfect. And the stock valve caps are plastic. It doesn’t bother me.

 

[KANE COUNTY ILLINOIS]

It might seem small…but sometimes it’s the small details that matter. The wife thinks I’m crazy. Bronco valve caps for the tires

If anyone is curious here’s the link
Ford Bronco Black ABS Plastic Tire Valve Stem Cap Covers (Pack of 5) https://smile.amazon.com/dp/B096CDF...i_i_1PG6AGH8NJFHBPV77ZH1?_encoding=UTF8&psc=1

I added Velocity Blue covers and they have the American Flag on the ends!!

 

[Bt_ostate]

if that was a 5 pack it’d be perfect. And the stock valve caps are plastic. It doesn’t bother me.

Did stink to have to buy two sets to get 5. Both yours and mine are great. Just liked the look of the aluminum caps.

 

[Cat]

It might seem small…but sometimes it’s the small details that matter. The wife thinks I’m crazy. Bronco valve caps for the tires

If anyone is curious here’s the link
Ford Bronco Black ABS Plastic Tire Valve Stem Cap Covers (Pack of 5) https://smile.amazon.com/dp/B096CDF...i_i_1PG6AGH8NJFHBPV77ZH1?_encoding=UTF8&psc=1

Be careful...they spin off too easy. I've lost two.

 

[Lifeliberty]

 

[MannyG20]

Last week I installed a MagSafe charger in my BL 7MT High Pkg 4-dr. This week I completed the @j_anderson DIY mods and added a charging port to the dash.

I put in the power supply last weekend so this weekend I only had to change out the defrost grill, install the charging port and fish the cables down to the glove box area to plug into the power supply cables. I did have to remove the trim from the A pillar - that was probably the most time consuming part of the project. in all it took me about 3.5 hours - if I did it again today I bet I could do it in about 1.5 hours.

When I was done I had 5 screws left over. As my mom used to tell me 'A quiet mind is a clear mind' so when I went to bed in that time between being awake and asleep I remembered where 4 of the screws went. I placed them back this morning and now just have 1 screw left over.

 

[Richterman]

Installed the Ford areoskin II. Hopefully this will deflect some bugs.
Installed the curt hitch and wiring

 

[Cat]

Installed the Ford areoskin II. Hopefully this will deflect some bugs.
Installed the curt hitch and wiring

Bug shield works pretty darn good!

Sponsored