What part/accessory are you looking for that a company has not made?

[CM81]

Lately I have been looking for some metal tail light cages to protect the lights but all the product I find are plastic. I would like a metal option for this use case.


I'm also looking for a stand alone cantilevered awning that goes on the back of a roof rack to provide shade and rain cover over just the tailgate area.

metal tail cages are out there. turn off road make some

https://turnoffroad.com/products/20...u5bcIQ6TCLGDqFTQ1vMgxbC-ewdZ-R5xoCfcoQAvD_BwE

Sponsored

 

[Callelk]

A way to mount this to the inside of the roll cage:

 

[CM81]

would love to see slide out storage options for a 2 door that doesn't require a seat delete.

 

[Area51BS]

I'll take a bumper that doesn't have cut-outs for LED lights and all those sensor holes. All those fill-in plates and plugs look like ass, it can't be that tough to set the program not to cut out 10 excess holes.

Apparently it is hard. I asked IAG to pull out 2 ez step flat metal step plates before they cut all the Hexagons in them. They said can’t do. Program is set to run batches. They just don’t want to.

 

[CheapFish]

I have to ask, what is the sprayer used for? I surf fish as well and can’t figure out what the sprayer is being utilized for. Thanks.

My cheap freshwater rinse for reels, tackle, etc. I use it to spray the sand off of everything I put back into the Bronco so cleanup is a little easier.

 

[Hossamus Prime]

Not sure I'd buy it due to price, but a replacement tailgate mod that folds down and spare tire that swings out like other Gen Broncos.

 

[Mad Martigan]

A plastic trim piece to cover the holes and pinch welds below the door rockers. Early on a couple of people came up with metal solutions that have bolts that are just not attractive. A clean black plastic piece of trim with no visible fasteners would be great. Since @Mabett did the metal version, they didn't want to do it again in plastic, but it would be nice.

I have the trail armor from ford and love them. They extend up higher then just the welds but I like the look.

 

[billybong420]

What's up Bronco6G! We get asked everyday to make new things for all sorts of vehicles, and we are curious on what people are wanting to be made for the Bronco that hasn't been done yet?
Let us know!

Visit https://dv8offroad.com/pages/ford-bronco-bumpers-and-accessories to shop all of our Ford Bronco Parts and Accessories.
Plus... use code "ForumMember" at checkout for 10% off!​

2 DOOR TONNEAU COVER

 

[Pygar]

Replacement seals for MIC hard top that actually seal the top.

Re-worked subwoofer compartment that doesn't rattle at 30% volume.

Replacement removable steel fender flares to replace the cheap ass plastic.

Perhaps some of these things may exist, but I've yet to find them.

 

[broncohopeful]

A money tree

View attachment 581602

 

[Broncotrax]

What's up Bronco6G! We get asked everyday to make new things for all sorts of vehicles, and we are curious on what people are wanting to be made for the Bronco that hasn't been done yet?
Let us know!

Visit https://dv8offroad.com/pages/ford-bronco-bumpers-and-accessories to shop all of our Ford Bronco Parts and Accessories.
Plus... use code "ForumMember" at checkout for 10% off!​

Re designed K frame cross members for full sized Bronco's with smooth rounded edges and more clearance that don't act as rock anchors but instead help glide and slide over rocks.
This would be the product of the year.

 

[helifino16]

Wow - this turned into a very popular thread!

I've been looking for 'Weekender Fender Flare deletes' that are easily swapped for the OEM Flares. Something just for trail use or just for show. This will give the 'look' (and capability) without sacrificing the legality requirement many states have that the tire not extend outside of the fender.

 

[Jdyount]

@DV8offroad I got one:

I would suggest fixing the prices of the stuff you already sell to remove the "Bronco Tax"! Love love a lot of the things you make but come on, how is it $649 for rear inner fenders for a Bronco but only $389 for a JL? Don't make sense. I get the fronts, they're a lot more complicated, but the rears look pretty darn close. I have the fronts but I refuse to spend that much on the rears.

Great thread, good on you for trying to reach out to fill wants for customers. I hate to bust your balls but if you're looking for feedback, that's the number 1 thing in my mind.

 

[Broncotrax]

Replacement seals for MIC hard top that actually seal the top.

Re-worked subwoofer compartment that doesn't rattle at 30% volume.

Replacement removable steel fender flares to replace the cheap ass plastic.

Perhaps some of these things may exist, but I've yet to find them.

Car toys has a subwoofer upgrade specialty box made just for big Broncos if you want to upgrade your sound system.

 

[Brian514]

An air compressor that can go in the tailgate similar to what Jeep offers.

Sponsored