- Thread starter
- #1
I got a hitch basket for our upcoming road trip. Problem is, when in reverse, the sensors beep like mad all the time now with the basket on. I've tried disabling all the setting in the menus, and they don't do squat. Every time in reverse, I get the constant beep.
I'm assuming I'll have to plug something into either the 4 or 7 pin connector, but my main question is the wiring. Does the factory harness just sense a plug there, or will I have to modify wiring on the harness in order to get the computer to think there's a trailer there and stop the incessant backup warnings?
I have a 7-4 converter as well as a 4pin laying around unused, so willing to use those if it's just a matter of connecting 2 wires.
I'm assuming I'll have to plug something into either the 4 or 7 pin connector, but my main question is the wiring. Does the factory harness just sense a plug there, or will I have to modify wiring on the harness in order to get the computer to think there's a trailer there and stop the incessant backup warnings?
I have a 7-4 converter as well as a 4pin laying around unused, so willing to use those if it's just a matter of connecting 2 wires.
Sponsored