35’s or 37’s? With just the sas I’m thinking 37’s but they look ginormous (which I like lol)Added Sasquatch springs and shocks but the first set of pics didn’t have Sas rears on yet. This is full Sasquatch suspension with factory rake and all.
35s. It might be the angle of the shot. I’m sitting down on step pretty low to ground. its still pretty aggressive looking, especially on 2 Door….even with moderate +25 offset.
I used hub rings on mine.
I went the same as you plus 37sgreat choice. i went all black...17 x 9 with -12 offset
Just wondering if you could also use the hub rings with the bigger center caps. Someone mentioned earlier that the hub rings do not work with the bigger center cap and only work with the flush cap, but arent both center caps push through?I got some aluminum ones
and the flush caps. I guess the rings sit inside the flush cap? See pic. Method said they aren’t necessary but I have some vibration over 80 mph and want to see if these help.
Im looking at these wheels and it looks like the flat center caps are also push through. Are the Flat and Larger caps installed differently?
I think they fit the larger caps which are also push through, but didn’t test. The Rings I got on Amazon are OD 106.1 MM and ID 93.1mm.
What center caps are those? The ones that came with my 305's are huge! I know theyre going to get smashed.
They are the flush mount caps. They sell them on the method site
Thanks! I ended up finding them, but they're backordered. I'm on their "notify" list.
