Any Black Friday discounts on the set up?It's the Baja Designs kit here: https://www.4x4truckleds.com/baja-designs-a-pillar-kit-for-2021-ford-bronco/
Sponsored
Any Black Friday discounts on the set up?It's the Baja Designs kit here: https://www.4x4truckleds.com/baja-designs-a-pillar-kit-for-2021-ford-bronco/
there are cash back rebates - check out Black Friday sectionAny Black Friday discounts on the set up?
so this is the correct price with discount or add the 75 lessthere are cash back rebates - check out Black Friday section
Great KIT! I wired mine to Aux 1 and the backlighting to factory fog switch. Its pretty awesome to have that backlighting on with the parking lights. Then of course 50k lumens from the LP4sOur LP4 Linkable Kits are back in stock!
https://www.4x4truckleds.com/baja-d...4-pro-for-2021-ford-bronco-hd-modular-bumper/
How did you wire yours?Looks great. I have the same 6 LP4 on the bumper but did a custom wiring harness to wire it differently than you did. Question I have, why did you choose to not go with the LP4 for the ditch lights? They have covers to block the side emitted light.
Gotcha. Our system was designed so that it all daisy chains together.Im of the school of I'd rather go overkill then underkill, thus I have dual 10 gauge wires feeding 3 LP4’s each parallel to each other, all going to relays and then directly to the battery. I use the Aux switch as a trigger switch to turn the lights on, and the backlights are connected to the parking lights through a marker adapter, so whenever the marker lights are on , so is the backlighting. No extra switch necessary. Also, everything is plug and play, no cutting or tapping of wires.
Anything is possible if you make some holes, but this is designed as a bolt-on kit for the HD Modular.Do you think this kit will work on the capable bumber if i just drill the holes in the top of the bumper?
yeah i just went out and looked. the capible bumper sits closer to the grill and this would need cutom brackets. But its got me thinking.Anything is possible if you make some holes, but this is designed as a bolt-on kit for the HD Modular.
The XL80s throw more light and was concerned about the side light. I didn't want to have to use the covers. I went back and forth on this decision and finally landed on doing the XL80s, but now you have me wondering if I should have done the LP4s....Looks great. I have the same 6 LP4 on the bumper but did a custom wiring harness to wire it differently than you did. Question I have, why did you choose to not go with the LP4 for the ditch lights? They have covers to block the side emitted light.
You cant go wrong with either, and ive been back and forth on this as well. I wish baja would extend the backlighting to other lines, which is why im leaning toward the lp4 on the pillar so that all my lights have backlighting. The lights still look good even with the covers installed:The XL80s throw more light and was concerned about the side light. I didn't want to have to use the covers. I went back and forth on this decision and finally landed on doing the XL80s, but now you have me wondering if I should have done the LP4s....