- First Name
- Mark
- Joined
- Jul 14, 2020
- Threads
- 17
- Messages
- 604
- Reaction score
- 587
- Location
- Northern NJ
- Vehicle(s)
- Current: 22' Braptor, 2020 BMW M340
- Your Bronco Model
- Raptor
not really unless you put the tray up. The third brake light is more of an issue which I removed like day 1. The whole kit is Moutains2Metal out of NC. Its completely modular so you can add/not add as much as you want. This is the starting point and go from there. They are on here so you can work with them. Moutains2Metal@vrtical could you post the link(s) to the molle panels and the rear cargo tray?
Perfect set up honestly
Does it effect your rearview visibility btw?
Did you just replace the sub speaker itself?5/4/23.
Replaced non B&O 7 speaker system sub. KICKER 48CWRT672 300W 6.75
yes for now.Did you just replace the sub speaker itself?
What color mesh is that, it kind of looks like Titanium or is it just black and the lighting is playing tricks on me?5/22/23.
Added JTops USA Sun Screen Mesh.
Its the black version but because of the mesh material, its obviously lighter.What color mesh is that, it kind of looks like Titanium or is it just black and the lighting is playing tricks on me?
What shackles are these?Added Diode Dynamics SSC2 pro ditch lights with backlighting. Using one of the aux switches and the back light is hooked up to an ignition source to not use up an extra switch.
GearAmericaWhat shackles are these?
MNJ Motor Rear Seat Back Protector for BroncoDo you have a link for the Velcro backing panel for the rear seats? I’ve been looking for something to put back there. I’m probably going to go with the Bronco rubber rear tray for the floor from Ford.
awesome, thanks a lot ! Nice looking bronco by the way
I really like this setup, super clean. Where is the antenna mounted?6/28/23.
Finished installing the Midland MXT275 using the Mountains2Metal above glove box bracket. Currently I have the unit powered on one of the unused fuses under the dash. The unit powers on/off by the handheld, I was hoping to use an accessory on fuse location to at least turn it off but haven't found the right one yet, but I will. I have a bunch of cat5 cable laying around so just ran an extension down to a plug in the cubby hole area, completely hidden. The handheld mount is from Proclip and is removable.
pics on page 2, I did that part first as I had to add pod brackets.I really like this setup, super clean. Where is the antenna mounted?