Sponsored

4" Dash with components?

meffie

Wildtrak
Well-Known Member
First Name
Raven
Joined
Mar 12, 2022
Threads
11
Messages
125
Reaction score
49
Location
Texas
Vehicle(s)
'23 WildTrak
Your Bronco Model
Wildtrak
Has anyone left 4" in the dash (aftermarket of course, not stock), and run components with the tweeter in the A pillar? Do the tweeters overpower the 4"? Does it balance the sound or muddy it?

I was going to do tweeter plates in the 4" location, then thought about leaving the 4", and putting the tweeters in the A Pillars.

Thoughts and opinions would be appreciated.
Sponsored

 

MOBRONCO

Big Bend
Well-Known Member
Joined
Mar 9, 2020
Threads
6
Messages
284
Reaction score
383
Location
MO
Vehicle(s)
F150
Your Bronco Model
Big Bend
People have asked, but haven’t seen any. Between the airbag and defrost vent it would be a challenge.
 

Grumpy

Big Bend
Well-Known Member
First Name
Who's
Joined
Dec 23, 2022
Threads
34
Messages
1,269
Reaction score
3,222
Location
On a Lake
Vehicle(s)
22 2dr
Your Bronco Model
Big Bend
You would have to be able to channel the tweeter separately from the 4" to achieve the separation your seeking.
 
OP
OP
meffie

meffie

Wildtrak
Well-Known Member
First Name
Raven
Joined
Mar 12, 2022
Threads
11
Messages
125
Reaction score
49
Location
Texas
Vehicle(s)
'23 WildTrak
Your Bronco Model
Wildtrak
You would have to be able to channel the tweeter separately from the 4" to achieve the separation your seeking.
Good point, although, theoretically, wouldn't the 4" tune as the amp/dsp is set too, and the components as the crossover is set?

Really not sure, never attempted to run things this way.
 
OP
OP
meffie

meffie

Wildtrak
Well-Known Member
First Name
Raven
Joined
Mar 12, 2022
Threads
11
Messages
125
Reaction score
49
Location
Texas
Vehicle(s)
'23 WildTrak
Your Bronco Model
Wildtrak
People have asked, but haven’t seen any. Between the airbag and defrost vent it would be a challenge.
I've seen plenty of people running tweeters in the a pillars, so not to worried about that aspect.
 

Sponsored

Grumpy

Big Bend
Well-Known Member
First Name
Who's
Joined
Dec 23, 2022
Threads
34
Messages
1,269
Reaction score
3,222
Location
On a Lake
Vehicle(s)
22 2dr
Your Bronco Model
Big Bend
As long as you can separate the mid from high through the crossover and send the high signal only to the tweeters. Then yes!
 
OP
OP
meffie

meffie

Wildtrak
Well-Known Member
First Name
Raven
Joined
Mar 12, 2022
Threads
11
Messages
125
Reaction score
49
Location
Texas
Vehicle(s)
'23 WildTrak
Your Bronco Model
Wildtrak
As long as you can separate the mid from high through the crossover and send the high signal only to the tweeters. Then yes!
Yea thats the whole point of the crossover with the component system. It ensures only highs are going to the tweeters.

My current 4" are running bass blockers as well anyway, so it's primarily highs only from them
 

Grumpy

Big Bend
Well-Known Member
First Name
Who's
Joined
Dec 23, 2022
Threads
34
Messages
1,269
Reaction score
3,222
Location
On a Lake
Vehicle(s)
22 2dr
Your Bronco Model
Big Bend
Yea thats the whole point of the crossover with the component system. It ensures only highs are going to the tweeters.

My current 4" are running bass blockers as well anyway, so it's primarily highs only from them
Yes I'm aware what it does, I was pointing out if op is able to such, especially the way ford did such a crappie job with the non b&o and b&o system.
 

Sponsored

Grumpy

Big Bend
Well-Known Member
First Name
Who's
Joined
Dec 23, 2022
Threads
34
Messages
1,269
Reaction score
3,222
Location
On a Lake
Vehicle(s)
22 2dr
Your Bronco Model
Big Bend
This is the last system I and my bud built for my 17 Ram 1500. I've been contemplating doing something with the Bronco. Still tossing my ideas around.

Ford Bronco 4" Dash with components? IMG_20181107_123322400


Ford Bronco 4" Dash with components? IMG_20181107_124919960


Ford Bronco 4" Dash with components? IMG_20181107_133239867


Ford Bronco 4" Dash with components? IMG_20181107_155432940


Ford Bronco 4" Dash with components? IMG_20181107_155506835


Ford Bronco 4" Dash with components? IMG_20181107_155457644


Ford Bronco 4" Dash with components? IMG_20181107_155525086


IMG_20210501_102444.jpg


IMG_20210228_152106.jpg
 
Last edited:

Murph914

Badlands
Well-Known Member
First Name
Mike
Joined
Oct 5, 2020
Threads
13
Messages
624
Reaction score
976
Location
Franklin, MA
Vehicle(s)
2008 F-350 reg cab srw v10 manual
Your Bronco Model
Badlands
Clubs
 
OP
OP
meffie

meffie

Wildtrak
Well-Known Member
First Name
Raven
Joined
Mar 12, 2022
Threads
11
Messages
125
Reaction score
49
Location
Texas
Vehicle(s)
'23 WildTrak
Your Bronco Model
Wildtrak
Yes I'm aware what it does, I was pointing out if op is able to such, especially the way ford did such a crappie job with the non b&o and b&o system.
Oh roger. Misunderstood what you were saying
 
OP
OP
meffie

meffie

Wildtrak
Well-Known Member
First Name
Raven
Joined
Mar 12, 2022
Threads
11
Messages
125
Reaction score
49
Location
Texas
Vehicle(s)
'23 WildTrak
Your Bronco Model
Wildtrak
Mti has plates to do 3-1/2s and a tweeter, but if you really want to do a 4” a surface mount tweeter should be fine. Just make sure they’re timbre matched. To get the best results use an active crossover in a dsp. Really depends more on your budget I’d think. https://www.mtiacoustics.net/all-en...Speaker-Panels/p/503984168/category=127527301
Yea I actually already ordered their tweeter plates, before I saw them release the 3.5/tweet plates.

So then I thought well maybe I'll just leave my focal 4's in there, a pillar mount the tweeter, and rolllike that. I just wasn't sure if the sound quality with that setup would be worth it or not, as I've never attempted to run a setup like that
 

Murph914

Badlands
Well-Known Member
First Name
Mike
Joined
Oct 5, 2020
Threads
13
Messages
624
Reaction score
976
Location
Franklin, MA
Vehicle(s)
2008 F-350 reg cab srw v10 manual
Your Bronco Model
Badlands
Clubs
 
Yea I actually already ordered their tweeter plates, before I saw them release the 3.5/tweet plates.

So then I thought well maybe I'll just leave my focal 4's in there, a pillar mount the tweeter, and rolllike that. I just wasn't sure if the sound quality with that setup would be worth it or not, as I've never attempted to run a setup like that
Ford Bronco 4" Dash with components? C6B31B70-8BA6-4B24-AA0B-56CA531D5C8A


Not sure if you’re on fb, but saw this a few days ago. Seems pretty sweet.
Sponsored

 
 


Top