- Thread starter
- #1
Tapped into the auxiliary wiring via the glove box to power a USB multiport splitter. USB multiports are not recognized via the single usb port, pending on your model Bronco. This is a simple job and is well worth it. If you plan on running more than one dash or interior powered accessory, it eliminates what could end up being a mess of cables running from the single usb port or center console power ports. I also wanted the ability to install my Alexa Auto, still working on its location, and my multi-mmb box, installed under seat, to watch TV, cable, etc. The wiring/cables can be easily tucked away, just remember to ground the initial hub/accessory. Another dash powered solution was to secure my portable power bank to the dash. Many of these units can last a very long time without recharging, or you may consider a solar powered power bank. This helps with those wanting to use their phones as temporary dash cams or any other device that requires power. It's always nice to have a clean look without all those cables. Although the only cables you'll now have are the ones coming from the multiport to your devices. The unit you see in the glove box is a hard wired phone holder from my minibike. It's temporary but whatever you decide on can be hidden behind the glove box. All cables, and pending on the device, can be stowed/hidden away.
Sponsored