- First Name
- Mike
- Joined
- Oct 16, 2020
- Threads
- 8
- Messages
- 246
- Reaction score
- 547
- Location
- Washington
- Vehicle(s)
- Raptor, Ranger, Mustang, Focus, Explorer
- Your Bronco Model
- Badlands
thanks for posting the prints! Just an FYI there is a split in your middle arm so it prints in 2 pieces. The solid needs to be merged back together.Here are the parts of what I worked up. I need to get a better picture of it in action, but...
The first is the CAD drawing of the plate that's mounted (by heavy duty velcro) to the area above the aux switches/sunglass holder. It uses GoPro connectors to an arm, then another GoPro Connection to the back plate for the head unit. I found some thumb screws that match the wonky metric screws that go in to the back of the head.
All of the angles are adjustable and that tan clip gets super glued to the back side of that red base plate to hold the cable for the head, in case we want to remove the radio head. If we want it all gone, we just peel it off that heavy duty velcro.
I'll get a better picture of it in use later for everyone.
I can post the .STL files on Thingiverse if anyone is interested in printing.
Sponsored