AR | LIMITED EDITION BADLANDS BAM BYODR - BRONCO6G EXCLUSIVE

[Hatman]

AR | LIMITED EDITION BADLANDS BAM BYODR / 100 Produced

We hinted over the winter that the AR | BADLANDS BAM would be coming. If you heard the rumors and were waiting for it, we're really close now! The raw parts are already being machined. These will be custom anodized by Anodized Solutions in Portland, OR. with a combination of our BADLANDS specific shade of orange and a MIL spec low gloss black on the rail sections to reduce line of sight glare and provide a classy color contrast and still maintain the overall theme. A MIL 8625 Type II anodized coating for UV tolerance and color accuracy will be employed. Anodized Solutions is well known in the industry for their MIL spec work with companies like Leopold, Noveske, Aero Precision, Blowsion, Boeing and many others. Their finish work is top notch and well known throughout the industry.

We'll be applying the BAM specific laser work here at STARKILLER BASE. Everything from Badlands National Park topography, the sequential production number (example: 43 of 100), Badlands coordinates, and our subtle branding. Hardware will be black oxide stainless steel, throughout.

This is going to be a limited production run for this accessory, to keep them exclusive. 100 in total. 60 in Picatinny and 40 in smooth. Pure Black AR | B.A.L.L.S. might be included. As always, Bronco6G members will get first notice when they go live and I doubt there will be any left for the outsiders. I'd like to keep it to one per customer.

Final pricing is TBD. I'll create a formal post when the time to SEND IT begins. I'm thinking late next week (5/13/22) once pricing is nailed down. It will also go live around the same time, on the website. You wont be able to checkout with the BADLANDS BAM in your cart, without a code. So, essentially, the first 100 people to SEND IT will get the code, and, as always, first paid, first shipped.

If you're not familiar with our AR | BAM BYODR, see the thread: here

-May the odds be ever in your favor-​

View attachment 319143

Send it

Sponsored

 

[Michael Grasso]

AR | LIMITED EDITION BADLANDS BAM BYODR / 100 Produced

Curtis, any progress on the replacement part that screws into the dash that the BAM then screws to? At one point you pondered making it as a bullet proof replacement.

mg

 

[mrconns]

Send it

 

[EIGHTLUG]

Curtis, any progress on the replacement part that screws into the dash that the BAM then screws to? At one point you pondered making it as a bullet proof replacement.

mg

It's actually next up on the list. It's already rolling in the development stage.

I want to call it The AR | SLAP, to go along with the BAM and the TAP. Structurally Located Accessory Point. It totally removes the janky plastic piece in the dash and replaces it with a chunk of billet that's mounted to the steel dash structure with two bolts and threaded to accept AR accessories and any other company's.

 

[GrayGhostDog]

Send it

 

[Stoutlagger]

Curtis, I joined the forum after seeing that you linked this on FB. It's always good to see the great things you are designing/building, whether it's for Shelby's or Bronco's!

 

[Homebowlking]

I my have to brake the rule not buying any parts intel the bronco comes in these look badass.

@EIGHTLUG If the B.A.L.L.S. do come with this deal can it be these B.A.L.L.S.

Send it. I have to have this!

 

[Gtrekker]

AR | LIMITED EDITION BADLANDS BAM BYODR / 100 Produced

We hinted over the winter that the AR | BADLANDS BAM would be coming. If you heard the rumors and were waiting for it, we're really close now! The raw parts are already being machined. These will be custom anodized by Anodized Solutions in Portland, OR. with a combination of our BADLANDS specific shade of orange and a MIL spec low gloss black on the rail sections to reduce line of sight glare and provide a classy color contrast and still maintain the overall theme. A MIL 8625 Type II anodized coating for UV tolerance and color accuracy will be employed. Anodized Solutions is well known in the industry for their MIL spec work with companies like Leopold, Noveske, Aero Precision, Blowsion, Boeing and many others. Their finish work is top notch and well known throughout the industry.

We'll be applying the BAM specific laser work here at STARKILLER BASE. Everything from Badlands National Park topography, the sequential production number (example: 43 of 100), Badlands coordinates, and our subtle branding. Hardware will be black oxide stainless steel, throughout.

This is going to be a limited production run for this accessory, to keep them exclusive. 100 in total. 60 in Picatinny and 40 in smooth. Pure Black AR | B.A.L.L.S. might be included. As always, Bronco6G members will get first notice when they go live and I doubt there will be any left for the outsiders. I'd like to keep it to one per customer.

Final pricing is TBD. I'll create a formal post when the time to SEND IT begins. I'm thinking late next week (5/13/22) once pricing is nailed down. It will also go live around the same time, on the website. You wont be able to checkout with the BADLANDS BAM in your cart, without a code. So, essentially, the first 100 people to SEND IT will get the code, and, as always, first paid, first shipped.

If you're not familiar with our AR | BAM BYODR, see the thread: here

-May the odds be ever in your favor-​

View attachment 319143

Looks good!!! I'd be in if you drop the Badlands and the Orange....

Add a Wildtrak n Ford Blue version an it sold.

That would be badass!!!

Team 2dr.

 

[EIGHTLUG]

Looks good!!! I'd be in if you drop the Badlands and the Orange....

Add a Wildtrak n Ford Blue version an it sold.

That would be badass!!!

Team 2dr.

So, what you meant to say was "When is the WILDTRAK version coming out?!"

We're on it.

 

[Pdshepherd]

Just ordered a regular one. Wish a Wildtrak color one would be made. ??

 

[Dirty Bronco]

SEND IT

 

[DaveInSA]

So, what you meant to say was "When is the WILDTRAK version coming out?!"

We're on it.

Can I Send It yet? Huh? Can I?

 

[frd415]

send it

 

[Michael Grasso]

It's actually next up on the list. It's already rolling in the development stage.

I want to call it The AR | SLAP, to go along with the BAM and the TAP. Structurally Located Accessory Point. It totally removes the janky plastic piece in the dash and replaces it with a chunk of billet that's mounted to the steel dash structure with two bolts and threaded to accept AR accessories and any other company's.

SEND IT!!!

 

[Mserjohnb132]

Send it. I don’t want to miss out on this one

Sponsored