ARCHETYPE RACING | BAM-BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

[pasekmi99]

AR | BAM BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

Here are your saucy renders of the three standard colors on the two rail designs. We have Picatinny available in Graphite Black, Tech Bronze, and Tumbled Matte Clear.

Pricing... Everyone wants to know what this sweet piece of kit will cost.

$275.00 shipped. BRONCO6G members will get 20% off ($220)! If you want in on the pre-purchase, before it's on the website or available anywhere else, here's what I'll need you to do. The parts won't be available outside of BRONCO6G until after November 5th or after SEMA wraps up.

Step 1: Reply to this thread with 'SEND IT' and I'll add you to the list on Post #2. Your place on the list isn't necessarily the order you will be receiving your AR | BAM BYODR, because they will be produced in bulk and orders fulfilled as they roll out of anodizing.

Step 2: PM me with your (actual) name, shipping address, and email. Also include the color and rail type you desire. I'll email you with a custom invoice with the BRONCO6G Member Discount applied. This will be applicable to 2 uses. I can go to 3, 4, or even 5 if you have that many BRONCOS. I know some of you will have more than one Bronco. This is also a way to grow the community and drive traffic to the website. This offer will also be available to all existing and new BRONCO6G members, beyond November 5th.

-Smooth Rail Option-

There's also the smooth rail option. Same colors are available.
Graphite Black, Tech Bronze, and Tumbled Matte Clear.

Being that the entire unit is modular, you'll be able to order one rail smooth and one rail Picatinny, if you so desire. In the end, it was just easier to produce the two rails separately. As always, we appreciate the support!

I need a photo of this in use. I don't quite get how it would be used (other than dash cam in the centre)

Sponsored

 

[Rick Astley]

AR | BAM BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

Here are your saucy renders of the three standard colors on the two rail designs. We have Picatinny available in Graphite Black, Tech Bronze, and Tumbled Matte Clear.

Pricing... Everyone wants to know what this sweet piece of kit will cost.

$275.00 shipped. BRONCO6G members will get 20% off ($220)! If you want in on the pre-purchase, before it's on the website or available anywhere else, here's what I'll need you to do. The parts won't be available outside of BRONCO6G until after November 5th or after SEMA wraps up.

Step 1: Reply to this thread with 'SEND IT' and I'll add you to the list on Post #2. Your place on the list isn't necessarily the order you will be receiving your AR | BAM BYODR, because they will be produced in bulk and orders fulfilled as they roll out of anodizing.

Step 2: PM me with your (actual) name, shipping address, and email. Also include the color and rail type you desire. I'll email you with a custom invoice with the BRONCO6G Member Discount applied. This will be applicable to 2 uses. I can go to 3, 4, or even 5 if you have that many BRONCOS. I know some of you will have more than one Bronco. This is also a way to grow the community and drive traffic to the website. This offer will also be available to all existing and new BRONCO6G members, beyond November 5th.

-Smooth Rail Option-

There's also the smooth rail option. Same colors are available.
Graphite Black, Tech Bronze, and Tumbled Matte Clear.

Being that the entire unit is modular, you'll be able to order one rail smooth and one rail Picatinny, if you so desire. In the end, it was just easier to produce the two rails separately. As always, we appreciate the support!

FULL Send it!

Edit: PM'd with contact info and order. I'm also in WA and happy to pick up or whatever works for you. @EIGHTLUG

 

[68halfcab]

AR | BAM BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

Here are your saucy renders of the three standard colors on the two rail designs. We have Picatinny available in Graphite Black, Tech Bronze, and Tumbled Matte Clear.

Pricing... Everyone wants to know what this sweet piece of kit will cost.

$275.00 shipped. BRONCO6G members will get 20% off ($220)! If you want in on the pre-purchase, before it's on the website or available anywhere else, here's what I'll need you to do. The parts won't be available outside of BRONCO6G until after November 5th or after SEMA wraps up.

Step 1: Reply to this thread with 'SEND IT' and I'll add you to the list on Post #2. Your place on the list isn't necessarily the order you will be receiving your AR | BAM BYODR, because they will be produced in bulk and orders fulfilled as they roll out of anodizing.

Step 2: PM me with your (actual) name, shipping address, and email. Also include the color and rail type you desire. I'll email you with a custom invoice with the BRONCO6G Member Discount applied. This will be applicable to 2 uses. I can go to 3, 4, or even 5 if you have that many BRONCOS. I know some of you will have more than one Bronco. This is also a way to grow the community and drive traffic to the website. This offer will also be available to all existing and new BRONCO6G members, beyond November 5th.

-Smooth Rail Option-

There's also the smooth rail option. Same colors are available.
Graphite Black, Tech Bronze, and Tumbled Matte Clear.

Being that the entire unit is modular, you'll be able to order one rail smooth and one rail Picatinny, if you so desire. In the end, it was just easier to produce the two rails separately. As always, we appreciate the support!

SENT IT!

 

[Michael Grasso]

Send it!

 

[Michael Grasso]

Send it!!

also make and send this!!

I'm in for 4 if you work this out

 

[rtaylor]

AR | BAM BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

Here are your saucy renders of the three standard colors on the two rail designs. We have Picatinny available in Graphite Black, Tech Bronze, and Tumbled Matte Clear.

Pricing... Everyone wants to know what this sweet piece of kit will cost.

$275.00 shipped. BRONCO6G members will get 20% off ($220)! If you want in on the pre-purchase, before it's on the website or available anywhere else, here's what I'll need you to do. The parts won't be available outside of BRONCO6G until after November 5th or after SEMA wraps up.

Step 1: Reply to this thread with 'SEND IT' and I'll add you to the list on Post #2. Your place on the list isn't necessarily the order you will be receiving your AR | BAM BYODR, because they will be produced in bulk and orders fulfilled as they roll out of anodizing.

SEND IT

 

[EIGHTLUG]

I need a photo of this in use. I don't quite get how it would be used (other than dash cam in the centre)

Here are a couple examples of pre prod units from others. Radios, toll pass, possibly a radar detector, dash cam, like you said, ... phone mount or small iPad mount for trail maps,.. It's there and I'm sure the industry will churn out more mounts for devices as this product organically grows.

 

[Ambassador]

@EIGHTLUG "SEND IT'

 

[ATLBronco75]

SEND IT!

 

[Wildtrak4ever]

AR | BAM BYODR

BRONCO6G Member Pre-Sale -
PM me again if you've "sent it" but your name isn't on the list, or if your name is on this list and you haven't received an invoice yet. Thank you!

1. BroncoBuckaroo
2. Lilj4425
3. McCracken
4. JediMcMuffin
5. Herbie
6. BroncoAdventures
7. PonyHunter
8. Lazarus
9. BroncoBoy22
10. 69BroncoX302
11. BravoZulu
12. De Brus
13. Smheard
14. Timmytime5
15. jh3113
16. DubC
17. helifino16
18. TXNavy
19. BroncoJAG
20. Rodneyltd
21. Slyder
22. rafterman
23. TexasBlaze
24. bmclain
25. FstFrd00
26. rhart540
27. mikey_photo
28. Tellsnow
29. sanborn
30. GravyTrain
31. cigartexan
32. Tor148
33. jasonf
34. Jb7
35. PlayUltimate
36. andrusoid
37. Rednek
38. Raskew
39.LABRONCO58
40.gmac
41.iamchewby
42.tjrinaldij
43.Inrustwetrust_
44.NewBroncoOwner
45.Belem
46.DREWR13
47.Theherofails
48.MattyAg
49.CptSamFalcon
50.dweskamp
51.TheeBullhead
52.ICUGAZN
53.Petey
54.Broncolife88
55.gizmohd
56.A10Warthog
57.privateer35
58.Gettyup
59.The Bronze
60.Kmcran
61.Heeba
62.ShaneMD27
63.

Send it

 

[LowerDixie77]

SEND IT...... BEFORE CHRISTMAS!!!

 

[Lars31177]

Send It

 

[Mdemieville]

Picked up a rail adapter on e-bay that works perfectly to mount GMRS radio to pic rail. Used a couple of 1/4-20 hardware and lock tight. Very clean on a solid fit.

Thats perfect. What did you search for when you found it?

 

[Mdemieville]

Oh hell, SEND IT!!!

 

[SLAY]

SEND IT

Sponsored