Badlands / FE Rear Bumper (part number?)

[JackTripper]

I would like to switch out my Wildtrak rear bumper with a Badlands/FE. Does anyone have a part number so I can order one or does someone have one for sale?

Thanks, guys.

Sponsored

 

[Ducati1098]

It would be much easier to just find a used one for sale.

Or go to your local dealership to get all the part numbers. The bumpers come bare. There are a ton of small pieces and parts you will need to have a complete bumper.

 

[JackTripper]

It would be much easier to just find a used one for sale.

Or go to your local dealership to get all the part numbers. The bumpers come bare. There are a ton of small pieces and parts you will need to have a complete bumper.

So, if I take from an existing BL or FE it will just be plug and play?

 

[Ducati1098]

So, if I take from an existing BL or FE it will just be plug and play?

As long as it came complete, yes.
Just make sure it comes with the rear parking aid sensors also, because they are different between the plastic and steel bumpers.
Everything else will just bolt right on.

 

[JackTripper]

As long as it came complete, yes.
Just make sure it comes with the rear parking aid sensors also, because they are different between the plastic and steel bumpers.
Everything else will just bolt right on.

Thank you. Do you know of anybody that selling one of these? I’ve received zero hits.

 

[Ducati1098]

Thank you. Do you know of anybody that selling one of these? I’ve received zero hits.

No I don’t unfortunately. I’ve been looking around for a take off one also near me. No luck so far

 

[Dadsquatch]

As long as it came complete, yes.
Just make sure it comes with the rear parking aid sensors also, because they are different between the plastic and steel bumpers.
Everything else will just bolt right on.

Dang…..so I can’t reuse my parking sensors in my OEM plastic bumper with the OEM steel bumper?

 

[Ducati1098]

Dang…..so I can’t reuse my parking sensors in my OEM plastic bumper with the OEM steel bumper?

According to the parts diagram, they use different ones. Not sure exactly what is different however, as I have not done this swap.

 

[Haelous]

With the mod bumper on the front, it's the same sensor just packaged differently (rotated 90 degrees?). People have managed to get them to work but it's unpleasant.

Maybe the issue w/the rear metal bumper is similar?

 

[Ducati1098]

With the mod bumper on the front, it's the same sensor just packaged differently (rotated 90 degrees?). People have managed to get them to work but it's unpleasant.

Maybe the issue w/the rear metal bumper is similar?

Very possible. Most of the sensors are very similar.

 

[JackTripper]

I believe another trim has a steel bumper, but WildTrak is plastic.

 

[Dadsquatch]

Badlands, FE, and Black Diamond all have steel rear bumpers. All other trims are plastic rear bumpers.

 

[kodiakisland]

Just an FYI, the rear steel bumper is a very thin shell of a bumper. You can easily hold it with one hand. When I put my flush mount lights in, I used an old jig saw blade that cut through it with no problem whatsoever. Find a takeoff for a couple hundred bucks, but don't spend real money on one. You'll be much better off buying aftermarket and getting a better bumper for the cost new from Ford.

 

[Bearcat1]

@flip

I broke the plastic passenger side of the rear bumper wheeling over the weekend.
I believe it is part# 17926 in the diagram below (passenger side).
Do you have the actual part# to order this and can you add it to the Ruxer Bronco parts list site so I can place an order? Thx

Sponsored