Good timing, because I just joined the club, just waiting on consistently warm temps (it's 38 this AM), and I'll have a pretty close to matching photo.
. Other than that and not fitting in the garage with the roof rack I love it. Did a little mock of what it’s gonna look like with new wheels/tire combo and I think it’s gonna look sweet.
Did they forgot to add it to your order or did Ford forgot to add it to your Bronco (on window sticker but not installed)? Still looks good. Silver is a completely underrated color. BaseMansquatch FTW!Only problem is they forgot my up fitter switches
Not sure I can find out. Will the dealer own up to it if they did ? I’m gonna have to go through my emails and see if I can trace back where the disconnect happened. Problem is that I ordered over a grand in lights and now it becomes a much bigger installation. Super frustrating.
To remove Ford “forgetting” to install it or just forgetting to install the switches, check you window sticker. It would be listed as an option (i.e. you paid for it). If you see it listed on the window sticker, check under the hood. If the wiring is there, then Ford just goofed on the switch panel. If those fail, start looking for the order sheet your dealer sent Ford. As @BAUS67 said, those options sometimes got lost in the reorder process.
Hope that is the case. It’s not on the sticker so I won’t get my hopes up but I will look under the hood when I get done work and pray I’ll find a little surprise. Otherwise all the lights I bought become a bigger install than I’d hoped
If it's not on the window sticker it's probably not on the Bronco. However...
If you end up not having the upfitter wiring under the hood and need to buy/install the factory switches, it's worth looking at other options like the SwitchPros SP9100 instead. IMO, it's an easier install than retrofitting the factory upfitters and will make wiring your lights a simpler process. Plus, it comes with additional functionality that the factory switches don't have.
Thank you sir. All very helpful information. Appreciate your replyIf you end up not having the upfitter wiring under the hood and need to buy/install the factory switches, it's worth looking at other options like the SwitchPros SP9100 instead. IMO, it's an easier install than retrofitting the factory upfitters and will make wiring your lights a simpler process. Plus, it comes with additional functionality that the factory switches don't have.
In my case, the Baja Designs LP6's on the bumper have a high and low mode; each mode is on a separate switch. If both are enabled at the same time the light can be damaged, but the SP9100 can be programmed to turn off the high or low mode switch when the other one is enabled. You can buy a separate $100 harness from Baja Designs that does the same thing, but it's expensive and install is not as tidy.
Also, SDHQ makes a bracket for the SwitchPros Power Module that mounts in the inner fender behind the fuse box and keeps everything nice and neat.
