Absolutely - it's not too far out either. I'll make a thread around the rear, as well, when i get the first production unit on the floor, here!
That's awesome! Thanks for the quick responses as well. Both bumpers look nice!Absolutely - it's not too far out either. I'll make a thread around the rear, as well, when i get the first production unit on the floor, here!
Who makes that bumper?Snacktime mentioned it’s mounting because there have been aome frame horn flange failures when winching and snatching. The bumper pictured below also bolts under the intercooler mounts. 10 bolts instead of 6.
I’ll pm you
Hey @Carli-Dan, does the bumper fit with the OEM steel skids on Badlands? Looks great! I like the winch mount.We just completed the pictures for our production unit and wanted to share them here, first!
- 100% USA MADE: Construction is 3/16" Cold rolled US Steel in the center section, 1/8" on the wings.
Modular design ensures ease of shipping; not designed to run only the center section- Satin Black Powder Coat for finish longevity with a Stainless Carli Logo Plate.
- Accommodates factory parking sensors; for those without parking sensors, the bumper will come with amber lights that are a direct fit into the sensor holes.
- The bottom of the bumper has a channel to ensure proper airflow to the intercooler with adjacent D-Ring recovery points.
- Sleek profile with a center section built to accommodate up to a Warn VR EVO 12-S Winch (Installed in pictures below is the Warn XEON 10-S) WITH more clearance for the factory front camera than any bumper on the market.
- Designed to integrate Baja Designs XL80 PRO in forward-facing cutouts and S2 diffused in the bumper side/rock light.
- Seamless integration to the Carli Skid Plate
- We will not offer provisions for the ACC - there are several kits on the market that effectively relocate this module, any one of them can be paired with our bumper. If equipped, this module WILL require relocation.
Walkaround:
Internal Structure:
Parking sensor mounts, inside bumper:
Snacktime mentioned it’s mounting because there have been aome frame horn flange failures when winching and snatching. The bumper pictured below also bolts under the intercooler mounts. 10 bolts instead of 6.
Can you also PM me?
Yup, see earlier post quoted below.
The front end is ripped apart right now (Swapping in RCV Axles) so there's no wheel/tire on. I can take more once it's back together.
Agreed - I'll get it out on a blank wall and post some!
