CVF and Wagner Intercooler wont connect

[Bronco564]

I have CVF aluminum hot and cold side piping installed on my 2023 Badlands 2.7 liter. I installed the Wagner high mount intercooler but the CVF piping wont reach the intercooler. The Wagner intercooler comes with two hoses but the are too long. Has anyone been in this situation and found a solution?

Sponsored

 

[Ducati1098]

I have CVF aluminum hot and cold side piping installed on my 2023 Badlands 2.7 liter. I installed the Wagner high mount intercooler but the CVF piping wont reach the intercooler. The Wagner intercooler comes with two hoses but the are too long. Has anyone been in this situation and found a solution?

CVF pipes are made for factory location, not a high mount.
CVF may be coming out with their own high mount soon, but I think it’s still in the testing phase.

 

[Gluestick]

I know I’m late to the party here, but similar approach using CVF charge pipes and CVF high mount intercooler - using 30° bend aluminum 2.75” joiner pipe and a single hump coupler on each side. Using vibrant aluminum joiners for context on length, I cut alu pipe length down by about 4” on each side then added the retention bead.

documented with some photos here: https://www.bronco6g.com/forum/thre...ooler-install-and-testing.121941/post-2809441

Sponsored