Diode Dynamics Chase Light Is Here

[jtgensler]

Bummer, mostly I want Chase and Strobe function via a switch not having to get out of the car and change flash patterns. Will stick with my tried and true serial controlled multi color strobes. they are less expensive too.

D-Switch panel would let you do all that. It's a bit spicy on the price, but if you have other lights & want to tie everything together, it's a solid option

Sponsored

 

[Squirrel13]

Got a wiring digram? how many trigger wires are there to control the various modes? looks like the pig tail is only 3 wire which limits the modes a fair bit.

On the Diode Dynamics site it looks like a Deutsch DT4. Gonna guess its that gray wire that activates the chase. It would be nice to see a video of all 20 chase modes.

 

[Squirrel13]

Grab one from us. We're actually going to be releasing a kit in a few weeks for the spare tire. It'll do brake/reverse/chase all with a plug and play harness. But for now, you can grab the SS10 chase bar from us

I’d be interested in a kit. Any chance you can take a video of each chase mode?

 

[Mikerider]

D-Switch panel would let you do all that. It's a bit spicy on the price, but if you have other lights & want to tie everything together, it's a solid option

certainly an option! I have a programable controller now and can strobe as needed, just looking for a less expensive, clean way to do it for other applications.

 

[Jason N]

Grab one from us. We're actually going to be releasing a kit in a few weeks for the spare tire. It'll do brake/reverse/chase all with a plug and play harness. But for now, you can grab the SS10 chase bar from us

The spare tyre kit. Will it mount to the wheel like in your pics or above similar to the stock brake light ?

 

[duel007]

Very cool, I might need one once there is a spare tire kit.

 

[Brian_B]

Well it's not as simple as that. The factory one is molded in …

… and then bolted on to the carrier. Not bolting onto the spare tire lugs, that’s just not a great solution in my opinion.

I will just do it myself when I drag myself
around to it, it someone else doesn’t beat me to it and figure out the deep engineering to replace a plastic stalk.

 

[4x4TruckLEDs.com]

The spare tyre kit. Will it mount to the wheel like in your pics or above similar to the stock brake light ?

Wheel well like the photos show.

 

[Finbox]

Make one that fits the Braptor, lug nut spacing, and have three running lights for the width of the vehicle and these things will sell like hotcakes, the Braptor third brake light really blocks the view, and this would open it up.

 

[4x4TruckLEDs.com]

Make one that fits the Braptor, lug nut spacing, and have three running lights for the width of the vehicle and these things will sell like hotcakes, the Braptor third brake light really blocks the view, and this would open it up.

we already sell a raptor spare tire kit and our chase kit will work for both

 

[mdainsd]

Is one of the chase patterns solid on?

 

[Nahdud829]

Is one of the chase patterns solid on?

yes. I don't remember where but it might've been on one of their social media posts from SEMA. They cycled through all 20ish modes and solid white or solid amber were options.

 

[mdainsd]

I hate following anyone with those things strobing, especially when not needed (i.e. the silt beds in the baja 1000 is a good place for them), so I aim to be courteous to others.

 

[G1D1UP]

Make one that fits the Braptor, lug nut spacing, and have three running lights for the width of the vehicle and these things will sell like hotcakes, the Braptor third brake light really blocks the view, and this would open it up.

Don't know what a 'Braptor' is but if I can't watch an install video for a Bronco Raptor, showing "plug and play" ease of use... I'm not getting off my couch to order one of these. I'll just sit here eating my Ramen Noodles until the spare tire kit is sold with a discount code attached.

 

[jtgensler]

… and then bolted on to the carrier. Not bolting onto the spare tire lugs, that’s just not a great solution in my opinion.

I will just do it myself when I drag myself
around to it, it someone else doesn’t beat me to it and figure out the deep engineering to replace a plastic stalk.

I'm going to adapt my turn offroad chase mount for this.
Pretty sure I have a spare section of the part that attaches to the tire carrier from when they replaced my first one.
I'll check for it if you want it?

Sponsored