Ditch lights

[Mdemieville]

I love that look. I was looking for a pic that shows the mounting location. If you can find one id be eternally grateful. I know they showed it in a video

Sponsored

 

[Bronc-O]

These are mounted under the hood hinge via a bracket. On the Liberty, there is a grommet in the fire wall that let me push the wires through, and install a switch inside.

Took a little field engineering to make sure the hood doesn't hit them when it closes or opens, but that location has worked out well.

Something like a Rigid cube should mount right onto the bracket.
https://www.amazon.com/Rigid-Indust...s&qid=1597265798&sprefix=rigid,aps,224&sr=8-6

 

[BroncoKong Jr.]

When you remove the cover on the mirror arm and install a bracket for the light it looks like due to the shape of the cover the brackets will leave an area that is unfinished and would look funny in my opinion. Ill see if I can find a pic of what I'm talking about

Don't think you'll need to remove the cover. The bracket should just go right on top, like a Jeep.

 

[Mdemieville]

Something like a Rigid cube should mount right onto the bracket.
https://www.amazon.com/Rigid-Industries-202113-Light-Universal/dp/B074TVQ4LQ/ref=sr_1_6?crid=1LUESXZ9MO1AQ&dchild=1&keywords=rigid+led+lights&qid=1597265798&sprefix=rigid,aps,224&sr=8-6

The pic I saw showed a removable cover where a bracket would then attach. After the bracket is attached it looks like it would have space around the bracket. Hoping there is something to take up that space

 

[Mdemieville]

Don't think you'll need to remove the cover. The bracket should just go right on top, like a Jeep.

Gotcha I guess that would make sense. From the looks of it maybe I was thinking too much into it

 

[Corsair]

Don't think you'll need to remove the cover. The bracket should just go right on top, like a Jeep.

With a bit of luck, they may have put power under the cover.

 

[ZackDanger]

Closing the loop on this thread.
The answer is “yes.”

https://www.bronco6g.com/forum/thre...-badlands-trail-rig-accessories-concept.3822/

 

[vintage]

I'm going with the offroad lights attached to the Safari bar and calling it a day.

 

[BroncoKong Jr.]

With a bit of luck, they may have put power under the cover.

I think they'll just go through the hood seam but who knows? Not us.

 

[Mdemieville]

Don't think you'll need to remove the cover. The bracket should just go right on top, like a Jeep.

Just saw this pic, and you were correct. They bolt on top.

 

[Bronc-O]

Closing the loop on this thread.
The answer is “yes.”

https://www.bronco6g.com/forum/thre...-badlands-trail-rig-accessories-concept.3822/

That's what I had in mind and select the upfitter switch option to directly wire them.

 

[Mdemieville]

That's what I had in mind and select the upfitter switch option to directly wire them.

Yeah im gonna do the switch option as well

 

[Bronc-O]

I think they'll just go through the hood seam but who knows? Not us.

 

[BroncoKong Jr.]

So I was right lol

 

[Mdemieville]

I was really hoping there was a wire run inside the mirror arm for the wiring. Guess I'll figure it out. Maybe its not to late for them to add that

Sponsored