it has the next direction at the top of the screen above whatever else is there.Does anyone have a picture what this looks like?
Sponsored
it has the next direction at the top of the screen above whatever else is there.Does anyone have a picture what this looks like?
This should fix the issueIf they fail then you likely need to reset the windows by holding the window switch up and once it hits the top count 3-5 seconds, the hold the switch down, when it goes all the way down again continue to hold the switch 3-5 seconds. This will reset the up and down limits for the window and for me fixed the windows pausing when using the remote sometimes. They now always work.
I got rid of that in the non as built drop down menusWait, the spreadsheet only shows the double honk removal when exiting a running vehicle, I’ve already removed that. What about the double honk when you press the lock key fob twice? Can you get rid of that ?
Darn I was hoping it was more than that, thanks for confirming.it has the next direction at the top of the screen above whatever else is there.
I was sitting on my couch when a car alarm under my apartment building went off and I thought some poor soul got backed into or something. Turns out I was the idiot and had leaned on my key in my pocket the wrong way. Changed that setting immediately after.That I don't know. I did however, change the PANIC button to a double press instead of a single one. You only need to lean on your keys once to change that...
I did that loading gear into the back of my truck. Doh!I was sitting on my couch when a car alarm under my apartment building went off and I thought some poor soul got backed into or something. Turns out I was the idiot and had leaned on my key in my pocket the wrong way. Changed that setting immediately after.
Not likely...New to FORScan but I'd like to be able to use Zone Lighting while the vehicle is in drive. Has anyone seen any adjustment for this?
No, you're not going to be able to do this with ForScan. The software basically only allows you access to functions that are inherent in the modules for different feature and options. There would have to be a setting in the module for a different model Ford, but I can almost guarantee all Ford's behave the same as far as recirculation in the HVACThe silence. Guess this sin't something anyone has explored then?
Don't count on it, this was an engineering fix for an exhaust leak problem the explorer had and acts the same across all Fords. Your gonna have to keep pounding that little Bronco icon every few minutes.Well that's unfortunate. I wish my drive home wasn't so stinky so It wouldn't be a bother. Oh well. Maybe they will do a software update in the future.
Thanks