Lowest Profile 2.7L Winch Bumper/Mount?

[Bad_Bronco]

You have to build it….and it takes a high mount intercooler and a short drum winch….

Have to build it..... Agree !!! But, to not move anything, and still make it work, I can take my winch on and off as I please, front or back (wired for both). When not in use, sits secure in the back compartment.

Sponsored

 

[Mdsuits]

Have to build it..... Agree !!! But, to not move anything, and still make it work, I can take my winch on and off as I please, front or back (wired for both). When not in use, sits secure in the back compartment.

That’s the best part about building your own….you can build what you want, the way you want.

 

[ironmike]

Hello Mike, I'm not sure why you are under the impression that I am not doing anything for the raptor bronco. My bumpers will go directly on a raptor bronco, as many customers have already installed. However the skid plate mounting is slightly different. I will be manufacturing raptor bronco specific skid plates. A friend dropped off a raptor bronco this morning, for myself to scan and start designing the raptor bronco product line.

My apologies @Lobo Off-Road. Last time I asked you about this (maybe 6-9 months ago), you didn’t have any plans for Raptor-specific products. I stand corrected and delighted to say so. I also have a BRaptor you are most welcome to borrow for design/development purposes and I live just up “the hill” from you. Can’t wait to see what you can come with!

 

[FordOwner]

I am kinda partial to my RC hidden winch mount. It's fully approved by my local mall.

As you can see, plenty of approach angle for the most serious mall situations.

This view gives me strong EB vibes. Nice shot!

...and while trying to stay on topic too, the Lobo WNC does look great! I've not decided to pull the trigger on a new front bumper yet, but this one is on my short list.

 

[da_jokker]

BAMF makes a bumper that holds the winch so low it barely can be seen in the camera. I didn't even have to relocate the winch box.

 

[akturbo]

BAMF makes a bumper that holds the winch so low it barely can be seen in the camera. I didn't even have to relocate the winch box.

BAMF is on the short list.

 

[FreddieLee]

yes, it’s unfortunate,I tried to keep them down as much as I could, but it also needs to makes sense.

The HNT went from $1,395 to $1,750?!

 

[akturbo]

The HNT went from $1,395 to $1,750?!

WNC went to $2K. I understand the need to adjust prices. Just means I'm not buying that bumper right now.

 

[broncorik]

WNC went to $2K. I understand the need to adjust prices. Just means I'm not buying that bumper right now.

I realize it might not be exactly what you're looking for but the Havoc bumper worked out awesome for me...at first I thought the bull bar was integrated but then realized it is optional:

https://www.extremeterrain.com/havo...6n5Nuyp-PuWGJLn4d2xoCmTMQAvD_BwE&gclsrc=aw.ds

 

[akturbo]

Thanks! Looks like a clean bumper, I'll look into it more.

 

[broncorik]

Thanks! Looks like a clean bumper, I'll look into it more.

It ships in days and it doesn't block IC.

 

[akturbo]

It ships in days and it doesn't block IC.

Cool! Do you have any pics of it installed without the bull bar?

 

[broncorik]

Cool! Do you have any pics of it installed without the bull bar?

The winch is on sale right now for under 400...bumper weighs the same as the modular one (including winch plate...just over 80 pounds).

https://openroad4wd.com/products/13...m1wEFDhXacduIcLK3fxao09pI9NmLB7BoC2awQAvD_BwE

 

[broncorik]

The winch is on sale right now for under 400...bumper weighs the same as the modular one (including winch plate...just over 80 pounds).

https://openroad4wd.com/products/13...m1wEFDhXacduIcLK3fxao09pI9NmLB7BoC2awQAvD_BwE

I put my driving lights in the holes for the bull bar. If you don't have anything to put there, it comes with plugs.

 

[Lobo Off-Road]

My apologies @Lobo Off-Road. Last time I asked you about this (maybe 6-9 months ago), you didn’t have any plans for Raptor-specific products. I stand corrected and delighted to say so. I also have a BRaptor you are most welcome to borrow for design/development purposes and I live just up “the hill” from you. Can’t wait to see what you can come with!

No worries at all, my apologies for the confusion, I may have created on the initial conversation. Im scanning the raptor bronco this week and should have the skids in production by the end of November.

Sponsored