- Thread starter
- #1
Hello,
I purchased these to install like i saw on Budget Bronco on YouTube but couldn’t install due to the fact that my crashbars are bolted and welded on. Too difficult to drill.
so i came up with an easier mod. Simply get 2 stainless pipe/hose straps for each side. Melt or cut 2 slits in the flap (use the strap as a stencil for the slit size). . Snake the ends of the straps through the slits. Then wrap them around the crash bars and tighten. It took about 10 minutes on each side. Thats it, no drilling or any other work. ThePlasticolor flaps only cost about $33, cheaper if you buy the ones with the Ford oval. The straps are about $1.50 each at HD. Buy four straps
Plasticolor 000543R01 Black Off Road Scene Easy Fit Mud Guard 11" - Set of 2 https://a.co/d/co9Bg4b
I purchased these to install like i saw on Budget Bronco on YouTube but couldn’t install due to the fact that my crashbars are bolted and welded on. Too difficult to drill.
so i came up with an easier mod. Simply get 2 stainless pipe/hose straps for each side. Melt or cut 2 slits in the flap (use the strap as a stencil for the slit size). . Snake the ends of the straps through the slits. Then wrap them around the crash bars and tighten. It took about 10 minutes on each side. Thats it, no drilling or any other work. ThePlasticolor flaps only cost about $33, cheaper if you buy the ones with the Ford oval. The straps are about $1.50 each at HD. Buy four straps
Plasticolor 000543R01 Black Off Road Scene Easy Fit Mud Guard 11" - Set of 2 https://a.co/d/co9Bg4b
Sponsored