My head hurts

[HoosierDaddy]

For reference:

17 x 8.5 +35mm wheel (Method 703)
35 x 11.5 - 17 tire
standard flare
no lift - base suspension
crash bars MUST be removed for 35's , 33's not so much, depends on how much poke you go for.

Pretty much flush, not a poke fan.

Sponsored

 

[nametaken]

Ok I ordered 17x8.5 00 offset with 285/70 r17 fingers crossed

 

[JL8jeff]

Here's 17x8 with 0 offset, not sure about the tire size but I think it was someone here. You might stick out about 1/4" more than this on stock flares, they would probably fit under Sasquatch flares.

 

[nametaken]

Here's 17x8 with 0 offset, not sure about the tire size but I think it was someone here. You might stick out about 1/4" more than this on stock flares, they would probably fit under Sasquatch flares.

Ok that's not too bad..
Looks good

 

[rguest3]

Here is a 285/75/18 tire (Taller than a Sasquatch Tire) on a 18x9 with a +12 Offset. They do not stick out past the Sasquatch Flare.

Sasquatch Suspension and 1" Level Lift up front.

Voxx 18x9s are one of the very few Old School looking Polished Aluminum wheels with a Positive Offset.

 

[Dads_bronze_bronco]

Here is a 285/75/18 tire (Taller than a Sasquatch Tire) on a 18x9 with a +12 Offset. They do not stick out past the Sasquatch Flare.

Sasquatch Suspension and 1" Level Lift up front.

Voxx 18x9s are one of the very few Old School looking Polished Aluminum wheels with a Positive Offset.

Love the grill. OEM heritage or aftermarket?

 

[rguest3]

Love the grill. OEM heritage or aftermarket?

That is an OEM Heritage Grill. I have not seen an Aftermarket Grill With the FORD letters yet.

 

[Dads_bronze_bronco]

That is an OEM Heritage Grill. I have not seen an Aftermarket Grill With the FORD letters yet.

There are a few, of course OEM is better:

https://juggernautpower.com/collections/bronco-grilles

https://www.ebay.com/itm/2041801917...GPH5VnTSRa&var=&widget_ver=artemis&media=COPY

 

[PurpleBronco2.3]

Just as a reference:

0mm puts the hub right in the middle of the wheel.
+ pulls the hub toward the outside of the wheel
- pushes the hub toward the inside of the wheel

Negative offset creates deep dish wheels. Positive offset eliminates a lip. The OG Raptor’s holey Beadlock was a +34 offset.

 

[rguest3]

There are a few, of course OEM is better:

https://juggernautpower.com/collections/bronco-grilles

https://www.ebay.com/itm/2041801917...GPH5VnTSRa&var=&widget_ver=artemis&media=COPY

Juggernaut sells the OEM Heritage Grill.

I have not seen the eBay one listed. BRONCO or FORD letters it looks like.

 

[jarod7736]

I'm trying to plan out my wheel tire combo for my BB non-sas getting built next month. I'm planning on...


Wheels - American Racing AR172 BAJA
Size - 17 X 9 -12
Tires - 295 R70 X 17" BFGoodrich KO2 All-Terrain
Suspension - 2" lift

does this look ok? Will the tires stick out past the fender flares? Do I need 17x8 instead?

 

[JL8jeff]

I'm trying to plan out my wheel tire combo for my BB non-sas getting built next month. I'm planning on...


Wheels - American Racing AR172 BAJA
Size - 17 X 9 -12
Tires - 295 R70 X 17" BFGoodrich KO2 All-Terrain
Suspension - 2" lift

does this look ok? Will the tires stick out past the fender flares? Do I need 17x8 instead?

Here's a picture of someone here that has 17x9 with -6 offset and 295 tires. The -12 would stick out another 1/4" so you would probably want Sas fender flares for more coverage.

 

[jarod7736]

Here's a picture of someone here that has 17x9 with -6 offset and 295 tires. The -12 would stick out another 1/4" so you would probably want Sas fender flares for more coverage.

Ok thanks! The only other option I see with those wheels for 17x8 would be a 0 offset. I’m not sure how much difference that would make.

 

[broncorik]

Juggernaut sells the OEM Heritage Grill.

I have not seen the eBay one listed. BRONCO or FORD letters it looks like.

I bought the Heritage grille from an online Ford dealer for much less than MSRP...and I painted it hot rod black (2k rattle can). I then got tired of the red letters...too red for me...and painted them to match my Archetype Racing Bronco emblems (silver).

 

[Lowcountry Bronco]

I bought the Heritage grille from an online Ford dealer for much less than MSRP...and I painted it hot rod black (2k rattle can). I then got tired of the red letters...too red for me...and painted them to match my Archetype Racing Bronco emblems (silver).

No offense, took me a second to even catch on seeing the picture that this wasn't a Black Diamond/Base grille and I'm an HE order. Which AR script did you get? I got the base base in silver and red so, at least for mine, the red will tie with the letters and I'll probably go red with the shackles.

Which dealer did you order from? I'd like to have a second grille to play around with without messing up the white factory one.

Sponsored