- Thread starter
- #1
Here's a picture of my oil & boost pressure gauge installation.
Sponsored
It's a mechanical gauge. I tapped in at the factory oil sending unit on the passenger side of the engine just below the head. It's hard to see in this picture. I used this adapter https://www.amazon.com/dp/B08DG6YQM1?ref=ppx_yo2ov_dt_b_product_details&th=1Where did you tap into and is it mechanical or a sender.
I'm curious what kind of oil pressure do you haveHere's a picture of my oil & boost pressure gauge installation.![]()
![]()
2.7Great thanks ,2.3 or 2.7 ?
When the engine is warmed up it has 26-28psi at idle. It jumps up from there to around 35psi at cruise RPM of 2,100. At max boost and revved up it climbs to 60+ psi.I'm curious what kind of oil pressure do you have
Thanks for the info my next project,might try it with an an line maybe #4
Non raptors have boost, but no oil pressure.do non raptors not have these gauges in the cluster menu? iirc my raptor has them