- Thread starter
- #1
Saw the test mules, here are my thoughts. Cactus grey is fantastic, goes from grey to tinted green to tinted light blue. I got a close up of the grey top so you can see the texture. Also, there are exterior accessory mounts on the mirror arms. Two had rock rails and the black one with the funky top had running boards. The funky top looks like something made in a beginners sewing class, and it was just taped to the plastic covering the seating area.
Also notice the factory steel bumper can transform into a stubby bumper (outlined in photo below by @FirstOnRaceDay).
Interior Measurements
I measured (from the outside) some of the things people have asked about.
Measurement Photos
More photos & videos (by Paddy Owe)
Stubby bumper conversion available on factory steel bumper (if the outlined piece is removed)
Also notice the factory steel bumper can transform into a stubby bumper (outlined in photo below by @FirstOnRaceDay).
Interior Measurements
I measured (from the outside) some of the things people have asked about.
- In the 4-door, from the back of the front seats in a driving position to the interior of the tailgate is about 6 feet. Moving the seat forward should give most people the chance to sleep inside with the rear seats folded.
- In the 2-door, from the back of the front seats in a driving position to the interior of the tailgate is about 4 feet.
- In the 2-door, from the top of the rear seat to the tailgate is around 12 inches (photo below). I would guess it’s 20 inches or so at cargo floor level.
- The Sasquatch step-in height is about 24 inches ( photo below)
- The standard model step-in height is about 20 inches (running boards lowers it to about 16 inches) (photo below).
- The roof height on the 2-door Sasquatch is 75 inches (photo below)
Additional info and pictures added 7/27. - My best guess on floor length with rear seats up in a 4-door, just over 36”.
- Rear gate is 50.5” wide, I’d guess you lose 5” of that to door jambs which would mean the cargo floor is 45” or so wide
- The top of the unfinished disguise top is 51” from the bumper. I would guess a production top will be 4”-6” lower than this.
- Overhead console with the sunglass holder instead of Aux switches.
- BRONCO accessory torx bolts.
- Trail camera and approach light under the side mirror.
- Front door length on the 4-door is 42”ish.
- Rear door length on the 4-door is 37”ish.
- Also saw 4 new F150s today.
Measurement Photos
More photos & videos (by Paddy Owe)
Stubby bumper conversion available on factory steel bumper (if the outlined piece is removed)
Sponsored
Last edited: