Show Us Your Reverse / Rear Chase Lights!

[Kach Vartan]

I am very happy with the DD kit. I also have them connected to my rear fog, light switch.

Looks sweet. Do you mind sharing how you connected the chase lights to the rear fog switch? I've read through the other thread hoping there was a simpler plug and play method, but everything I saw seemed to require running new harnesses from the from of the vehicle or adding new "pins" to existing connectors.

Sponsored

 

[Lordsandy]

Very easy.
* disconnect, the license plate light plug.
* I pulled it outside between the bumper and rear fender to make it easier to work on.
* jump/tap off the blue and white striped wire.
* reconnect the rear license plate light plug.

 

[fallguy]

I bought my bumper 95% for the lights on it. I was sick and tired of not being able to see when backing up. The middle lights come on when I put it in reverse, the outside pods come on with AUX 5. I am very happy with the lighting now, can see much better from the side mirrors and the backup camera.

I didn't want lights attached to my tire, don't like the look. And then when backing up when out such at as a restaurant, blinding people in parking lot of eating on a patio because the lights would be so high.

 

[C6ZZGT]

Love mine from Diode Dynamics. Has a reverse light function as well.

Do you have an install post about them ?

 

[Docdownes]

@Fast Intentions Inc. Chase Bracket for Braptor running a spare set of the rigid lights from the front of the truck

Planning to do the same. What harness did you use to connect to aux?

 

[BeerRunner]

I am very happy with the DD kit. I also have them connected to my rear fog, light switch.

View attachment 610400
why is yours different - front and back fogs? Only two wires on my License plate light.

 

[A51Bronco]

Do you have an install post about them ?

I didn't, but it was plug and play as long as you have the tow package. It took me 10 minutes to install. Most of the time was just figuring out where i wanted to hide the wires.

 

[bkfit]

 

[Ford Motor Company]

Great pic, BK! Thanks for sharing and for being part of the Ford family!

 

[jalawson]

Here are my rear fog lights. They’re Morimoto 4bangers that I disassembled and applied a red film to. They’re perfect for heavy rain, fog, and dust. Wired them to the factory rear fog switch.

 

[0ne]

Anybody without factory backup sensors source a backup sensor bumper and put little lights in the backup sensor holes? Seems like that would be a pretty slick idea?

 

[sundaeman]

I didn't, but it was plug and play as long as you have the tow package. It took me 10 minutes to install. Most of the time was just figuring out where i wanted to hide the wires.

So, I don't have the factory installed tow package. However I had the 7 pin kit installed, think that would do the trick?

 

[cynicalrider]

Here are my rear fog lights. They’re Morimoto 4bangers that I disassembled and applied a red film to. They’re perfect for heavy rain, fog, and dust. Wired them to the factory rear fog switch.

That's a cool idea, I assume to increase your visibility to others in those scenarios?

 

[jalawson]

That's a cool idea, I assume to increase your visibility to others in those scenarios?

Exactly.

 

[Peitnahtan]

Very easy.
* disconnect, the license plate light plug.
* I pulled it outside between the bumper and rear fender to make it easier to work on.
* jump/tap off the blue and white striped wire.
* reconnect the rear license plate light plug.

You tapped your lights to the reverse taillights?

Sponsored