Slight set back with the RCV axles and BroncBuster diff tube

[Bird Dog Off Road]

Error from the first shop on the install took us on a whirl of anxiety! Rental car (thank you airline miles) a second shop and several phone calls between a second shop, RCV, and Bracken Machine and all is good now.

Sponsored

 

[Broncoman7072]

Glad to see it was an install issue and not a part issue.

 

[Felix808]

Glad you got the support to get it sorted.

 

[Snacktime]

Sounds like BB should press in the bearing.

 

[Bird Dog Off Road]

Sounds like BB should press in the bearing.

The way it was explained to me is that you cant do that and get the other stuff in.

 

[Bird Dog Off Road]

Regarding the grease from the boot on the driver side. Bronc Buster had the same issue with his and recommended cleaning it good with brake cleaner and using 3M black silicone gasket around the edge to prevent it and that worked. RCV is sending me a now 'boot strap' (I'm assuming the are referring to the hose clamp).

 

[NorthShoreBronco]

Just had a new cv shaft put in last week and it's doing this... will have it in the shop later today. Will check to see if the bearing got pushed in?....

Sponsored