Sneak peak at development on our roof rack! JcrOffroad

[JcrOffroad]

Hey everyone! We get hit up regarding roof rack development all the time. I wanted to make a stand-alone thread for this product progression.

Goals:
- Strong enough to carry the standard dynamic loads you would see from the common gear used for overlanding; roof top tents, hi-lift jacks, solar panels, etc.
- Aluminum construction to save on unsparing weight addition.
- Steel mounting brackets to keep it long lasting and durable.
- Modular; allowing for someone to start with the short rear rack, go to a full rack. Also allow for pairing down based on need. Run just the rear rack when you don’t need a full setup.
- Allow roof racks to still be removable.

4-Door will be first up, followed by a 2-door design.

To give you guys an idea of accessories we already have available for roof racks;

https://www.jcroffroad.com/category/ROOFRACKS.html

So off we go! Please ask if you have any questions!

Sponsored

 

[JcrOffroad]

Here is our rendering for the 4-door rack! We’ll have more detail as we go along, first step is getting this into a working prototype.

 

[JcrOffroad]

Reserved

 

[JohnnyBronco]

Those of us "poor souls" with softtops only and loath to spend the nearly $6000 (or more counting shipping and painting) for an aftermarket hardtop as none, even MIC, nears any kind of availability for the next several years if ever from Ford, need. a rack that is exo to the roof (as in exoskeleton)

I commend your concept, however, and the modularity

 

[JcrOffroad]

Those of us "poor souls" with softtops only and loath to spend the nearly $6000 (or more counting shipping and painting) for an aftermarket hardtop as none, even MIC, nears any kind of availability for the next several years if ever from Ford, need. a rack that is exo to the roof (as in exoskeleton)

I commend your concept, however, and the modularity

We have had discussions regarding support mounts for the soft top. Unfortunately keeping the top operational with a rack is going to be a problem.

 

[Beach_Bum]

Your short rack looks similar to another vendor's design. I hope you figure out a way to make a short rack for the 2-dr without relying on forward rails.

 

[FLOBBRONCO]

Following...

 

[FLOBBRONCO]

Light mount since you'll probably take the OEM mount for accessories?

 

[JcrOffroad]

Light mount since you'll probably take the OEM mount for accessories?

Like a light bar? We’ll have front fairings for a 40” single row light bar.

 

[GETSCHWIFTY]

No one cares about the 4 door.

Where’s the rendering for the 2 door?

 

[CTS-V]

Following. I have your tailgate table installed and really love the quality of your work!

 

[Compta38]

No one cares about the 4 door.

Where’s the rendering for the 2 door?

take rate says otherwise.

 

[IXxMcCoyxXl]

Keep me posted on the rack for 2 door

 

[FLOBBRONCO]

Perfect.

 

[GETSCHWIFTY]

MuH tAkE rAtE

Sponsored