Special Tools Needed

[V1Rotate]

Do you happen to have the part #'s for the LCA bolts and nuts? I'm thinking about grabbing some spares before I try to install my new stuff.

I do.. at least for my '22 (assuming they're still the same). I ordered mine from Ford parts center back at that time but looks like Tasca has them readily available now too
LCA bolt - W720555-S439
LCA Nut - W720216-S442

Sponsored

 

[JL8jeff]

I do.. at least for my '22 (assuming they're still the same). I ordered mine from Ford parts center back at that time but looks like Tasca has them readily available now too
LCA bolt - W720555-S439
LCA Nut - W720216-S442

Thanks!

 

[Callelk]

Which you can buy from your dealer, Ford Performance, or most of the Ford Performance resellers (like Lethal Performance): https://performanceparts.ford.com/part/M-3B477-A

Or... ya know... just reuse the nut. *Hides...*

wonder why this part says it won't fit a Bronco?

 

[Ducati1098]

wonder why this part says it won't fit a Bronco?

Where does it say that?

Edit: Oh I see, on the ford accessories page.
It’s likely because they don’t let you narrow down the model further, and it will not fit a Bronco Raptor.

These will fit a regular Bronco though, just like the FP listing says.

 

[Callelk]

Where does it say that?

Strange and then when I try to change vehicles it flashes and does all sorts of weird stuff...FordBot Revenge?

 

[Ducati1098]

Strange and then when I try to change vehicles it flashes and does all sorts of weird stuff...FordBot Revenge?

I think I understand what you mean now, see my edit on the previous comment

 

[2021FordBronco2]

Well after the help from a friend it is finished. Love the outcome. Loosened the UCA, Sway Bar End Links, and Outer Tie Rods and made it to where the knuckle could be moved to the side and used pry bars on the LCAs to get it on. Wasn't easy but it went in.

 

[BoverW]

Pass-through ratchet is a big time saver, reaching the top nuts. You will need it for the strut top nut and swaybar links, if taking them apart. You don't have to remove the fender liner.

Torque wrench

What torque wrench do you use for the rear top nuts? Tight space.

 

[Robs]

What torque wrench do you use for the rear top nuts? Tight space.

I try to get a feel for the right torque using the wrench on a more accessible fitting. I think I was able to do two of the three and then just used judgement on the innermost nut. I don’t think you can go massively wrong even without one

Sponsored