- Thread starter
- #1
I haven't seen it posted in one place and was hoping those service techs out there could help gather together a comprehensive list of torque specs that we can refer to.
I will update this post with all torque specs that people post here and add any bolts that people want added to the table.
I went ahead and purchased the 3-day workshop manual (So dumb it's so expensive, I miss the days of haynes) so if there are any torque specs people want added just reply and I'll add it and I will be going through it to find all the values I can.
If you want to see the shop manual for yourself you can pay for a 3 day license to view https://www.motorcraftservice.com/
Once I have a final list i'll organize the table alphabetically.
**Edit: I found a post of a very detailed torque spreadsheet from Carbonsteel Which can be found here
I wasn't able to easily find it when searching originally so that's why I made this post. Since his is so complete I may try to make this a list for common/quick items and anything outside of that can be found in Carbonsteel's doc
I will update this post with all torque specs that people post here and add any bolts that people want added to the table.
I went ahead and purchased the 3-day workshop manual (So dumb it's so expensive, I miss the days of haynes) so if there are any torque specs people want added just reply and I'll add it and I will be going through it to find all the values I can.
If you want to see the shop manual for yourself you can pay for a 3 day license to view https://www.motorcraftservice.com/
Once I have a final list i'll organize the table alphabetically.
**Edit: I found a post of a very detailed torque spreadsheet from Carbonsteel Which can be found here
I wasn't able to easily find it when searching originally so that's why I made this post. Since his is so complete I may try to make this a list for common/quick items and anything outside of that can be found in Carbonsteel's doc
Lug nuts / spare wheel | 100 ft lb / 41 ft lb |
|
Outer Tie rod end | 46 ft lb |
|
Inner tie rod end | 89 ft lb |
|
Rear diff cover bolts | Stage 1: 177 lb. In Stage 2: 25° |
|
2.7 Oil filter canister | 18 ft lb |
|
Front/rear diff fill bolt | 21 ft lb / 20 ft lb |
|
Trailing arm | 159 ft lb |
|
Skid plate bolts | 22 lb.ft metal, 124 lb.in plastic |
|
Upper control arm bolts | 122 ft lb |
|
2.3 Oil drain plug | 20 ft lb |
|
Axle Nut | 221 ft lb |
|
Upper ball joint | 46 ft lb |
|
Shock absorber assembly lower nuts | 66 ft lb |
|
Stabilizer bar link lower nut | 122 ft lb |
|
Wheel Hub Nut | 221 ft lb |
|
Lower ball joint nut | 85 ft lb |
|
Lower control arm bolts | 210 ft lb |
|
Front stabilizer bar bracket | 66 ft lb |
|
Shock absorber lower bolt and nut | 350 ft lb |
|
Rear shock absorber upper nut | 41 ft lb |
|
Panhard rod | 159 ft lb |
|
Rear Sway bar | 30 ft lb |
|
Beadlock vanity ring | 22 ft lb |
|
Transfer Case | Transfer Case Plug: 26 lb.ft for Part-Time & 18 lb.ft for the 4A |
Sponsored
Last edited: