What are these harnesses for?

[pakrat]

Had the rear drivers plastic panel over the wheel well opened up for sound deadening install and found these wire harnesses in there. Anyone know what they are for?

Sponsored

 

[Nacho23]

Tow module will bolt there and those three get plugged into it.

 

[pakrat]

Tow module will bolt there and those three get plugged into it.

TY! Makes sense. Was the only option (tow pkg) that I didn't get.

 

[Nacho23]

I installed the kit a few months ago, so it’s fresh in my mind lol. Also, I have a spare module if anyone’s interested, I’d be willing to part with it (you’d still need the pin connectors, wiring harnesses, and programming)

 

[HotdogThud]

Had the rear drivers plastic panel over the wheel well opened up for sound deadening install and found these wire harnesses in there. Anyone know what they are for?

That's where the ADV top gets plugged in. You'll notice it's empty.

 

[ejaffe]

Wait the truck is pre-wired for the tow module? My hitch came with a harness that goes back to the battery and needs to be spliced into the tail lights.

 

[F-Spot]

Wait the truck is pre-wired for the tow module? My hitch came with a harness that goes back to the battery and needs to be spliced into the tail lights.

It's the tow module for the 7-pin

 

[ejaffe]

It's the tow module for the 7-pin

That's even better then. Good to know.

 

[SuperDave150]

Had the rear drivers plastic panel over the wheel well opened up for sound deadening install and found these wire harnesses in there. Anyone know what they are for?

@pakrat I have sound deadening on my to-do list. I even have he materials. But I don’t know how to take those panels off without breaking them. Do you have a good resource for how to remove the interior trim panels ?

 

[Inigo Montoya]

@pakrat I have sound deadening on my to-do list. I even have he materials. But I don’t know how to take those panels off without breaking them. Do you have a good resource for how to remove the interior trim panels ?

https://www.crutchfield.com/S-MqbK4...WRmBRIv_-Bx2Z8AkkwJLG9UOXRpomhYRoCwp8QAvD_BwE

 

[DriveAllNight]

Couple of things, having just adding the hitch myself this past Sunday and adding sound deadening and sound proofing material in the cargo area....

1. Watch the 151 garage peeps take apart theirs, good tips: taking apart your Bronco
2. Only 2024s are prewired to almost plug and play the tow module (you still have to tell the computer)
3. Earlier Broncos, I believe you have to run the wires, not just connect plugs.
4. The hitch stuff is easy, the sound stuff is a pain in the ass.

 

[Mrchoochoo]

I installed the kit a few months ago, so it’s fresh in my mind lol. Also, I have a spare module if anyone’s interested, I’d be willing to part with it (you’d still need the pin connectors, wiring harnesses, and programming)

How much are you asking for the module?

 

[Nacho23]

How much are you asking for the module?

Pm me if you’re interested

Sponsored