What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Fly2Win]

I finally "fine tuned" my lift. Since installing the Eibach springs the rear has settled quite a bit, plus I towed a trailer to Moab and back. It pulled it ok, but felt like I was staring at my hood the whole time. Rather than just add some spacers, I cannibalized a Rough Country 2" lift kit using just the parts i needed. Used only the rear spacers, brake line brackets, and panhard relocate bracket to lift the rear. It's back to having a slight rake, but w/a trailer it will be level. Panhard angle is perfect now...was giving me that sideways scoot feeling on really hard bumps...nothing I couldn't live with, but now its good again. Also added the diff drop from the kit...wasn't having any issues, but can't hurt! Was gonna do this after axle swap, but it keeps getting pushed back, so I might just cancel it.

Can you tell me about the panhard relocation kit? I did Eibach’s and 37’s and there is definitely a more noticeable rear sideways hop over bumps or road heaves. It would be nice to tame it down a little.

Sponsored

 

[BroncoT]

Day trip to Fort Fisher, NC. No hauling stuff a half mile for this dad.

 

[Bmadda]

Can you tell me about the panhard relocation kit? I did Eibach’s and 37’s and there is definitely a more noticeable rear sideways hop over bumps or road heaves. It would be nice to tame it down a little.

It was part of the 2" lift kit that I used to get all these parts. If you call RC they may sell you just that bracket (they usually will do that), but I wanted the diff drop and rear spacers too, si I just ordered a whole kit.

https://www.roughcountry.com/ford-bronco-lift-kit-51071.html

 

[Fly2Win]

It was part of the 2" lift kit that I used to get all these parts. If you call RC they may sell you just that bracket (they usually will do that), but I wanted the diff drop and rear spacers too, si I just ordered a whole kit.

https://www.roughcountry.com/ford-bronco-lift-kit-51071.html

Thanks! I will look into it.

Liking your A51 2D by the way!

 

[TNcoupe]

Took the family and Bronco out to Summer Fest at DirtFish. Had an awesome time.

SWEET BABY JESUS.....a Quattro and an 037

 

[Arokcrwlr]

Thanks! I will look into it.

Liking your A51 2D by the way!

RockJock sells a trac bar relo bracket also - what I'm running...

https://www.rockjock4x4.com/RJ-181400-101

 

[Kyleshemesh]

Installed the Baja XL lightbar. Took a lot longer than expected, some bolts were hard to get to. Overall though, looks great and is nice and bright!

 

[Ford Motor Company]

Went for a little ride with a great group, had fun!!

Hope you had a blast Tracey! Thank you for sharing with us.

 

[Ellis Family Garage]

My son and I drove the 3rd section of the Washington BDR

 

[Offroad Newb]

Picked her up last Thursday. Installed the Diode Dynamics pillar lights and got the fronts tinted 15% to match the factory tint.

 

[Mikey1287]

Installed the UDA EGOI 2 air compressor under the hood. Easy install.
This will make airing up and down much easier at the OBX next week

 

[Mike T]

Installed Ford performance hood struts. After getting them I realized that they are actually built by Redline. Wish I would have researched and saved myself $40 for some other thing for the ride. If you are vertically challenged you may have to close the hood from the side due to the extra lift. Love the design, looks like it came from the factory with it.

 

[kodiakisland]

RockJock sells a trac bar relo bracket also - what I'm running...

https://www.rockjock4x4.com/RJ-181400-101

That’s what I have as well.

 

[Freedom5]

Carbon fiber look overlay and mirror ditch lights installed today

 

[Gambitl7]

Carbon fiber look overlay and mirror ditch lights installed today

How was the install of the lights? I’ve heard they can difficult with the lux package. I like the idea but if they are a pain for the price I might pass.

Sponsored