Pilar light mounts

[Bronco671]

I have been looking at videos and pictures of the pillar mount lights built by a many different companies(BD,DD,KC and Rigid). I don't like the look of the lights mounting directly on the cowl.
The Body Guard mount looks really nice, Are there other kits that actually have a cowl mounting plate?
I see BD has one but watched a video and it looked like it wasn't included. Seems everyone's light kits are just a little different.
Anyone else using different brackets, pictures would be nice.

Sponsored

 

[PWillette]

You can purchase the bodyguard brackets separately, $75/pr. I haven't seen anything similar from others

 

[Paul Gagnon]

https://motobilt.com/collections/ford-bronco/products/a-pillar-led-light-mount-for-bronco#

 

[VelocityBronco]

I have been looking at videos and pictures of the pillar mount lights built by a many different companies(BD,DD,KC and Rigid). I don't like the look of the lights mounting directly on the cowl.
The Body Guard mount looks really nice, Are there other kits that actually have a cowl mounting plate?
I see BD has one but watched a video and it looked like it wasn't included. Seems everyone's light kits are just a little different.
Anyone else using different brackets, pictures would be nice.

I bought my Baja Designs pillar kit from @4x4TruckLEDs.com and it came with the mounting plate that uses the 2 Bronco screws and has a threaded stud to mount the light bracket on. Also came with full wire harness, additional lenses and some rubber strips for mounting too. It was a very nice kit, I would recommend 10/10.

 

[4x4TruckLEDs.com]

I have been looking at videos and pictures of the pillar mount lights built by a many different companies(BD,DD,KC and Rigid). I don't like the look of the lights mounting directly on the cowl.
The Body Guard mount looks really nice, Are there other kits that actually have a cowl mounting plate?
I see BD has one but watched a video and it looked like it wasn't included. Seems everyone's light kits are just a little different.
Anyone else using different brackets, pictures would be nice.

Almost every kit out there mounts to the exact same points on the mirror area. Baja Designs provides an 'off-set' plate which is NOT required to install the lights unless you have their bigger XL Series. Some folks use it because it does off-set them a little bit.

Here are two videos showing the Baja Designs pillar lights installed





Both used the Baja Designs lights: https://www.4x4truckleds.com/baja-designs-a-pillar-kit-for-2021-ford-bronco/

You can also get the Diode Dynamics lights as well which install very similar: https://www.4x4truckleds.com/diode-dynamics-stage-series-ss3-ditch-light-kit-for-2021-ford-bronco/

Pickens Party of 5 showed the installation if you DO NOT have upfitters. And CoderMan showed the installation if you DO Have upfitters.

 

[stbanning]

I have the Motobuilt brackets. They set up a little higher and out a little further. Very stout But, they do come unpainted, which i didnt realize.

 

[cf_davey]

I have been looking at videos and pictures of the pillar mount lights built by a many different companies(BD,DD,KC and Rigid). I don't like the look of the lights mounting directly on the cowl.
The Body Guard mount looks really nice, Are there other kits that actually have a cowl mounting plate?
I see BD has one but watched a video and it looked like it wasn't included. Seems everyone's light kits are just a little different.
Anyone else using different brackets, pictures would be nice.

I bought Heretic personally. IMHO I believe they are the sharpest-looking lights available.

https://www.hereticstudio.com/?gcli...6vLMi0nd5M2fR7TVRmM945miU2jDkxOBoCx3gQAvD_BwE

I have NO connection to them whatsoever, except that they are from Utah. To me they are sexy and I can't wait to get them on my Bronco. I bought the light bar and the ditch lights.

 

[Herbie]

I have been looking at videos and pictures of the pillar mount lights built by a many different companies(BD,DD,KC and Rigid). I don't like the look of the lights mounting directly on the cowl.
The Body Guard mount looks really nice, Are there other kits that actually have a cowl mounting plate?
I see BD has one but watched a video and it looked like it wasn't included. Seems everyone's light kits are just a little different.
Anyone else using different brackets, pictures would be nice.

These raise them and allow you to add multiple lights if that is of interest.

https://mountains2metal.com/product/bronco6g-apillardualsxs/

 

[BroncoAZ]

I bought Heretic personally. IMHO I believe they are the sharpest-looking lights available.

https://www.hereticstudio.com/?gcli...6vLMi0nd5M2fR7TVRmM945miU2jDkxOBoCx3gQAvD_BwE

I have NO connection to them whatsoever, except that they are from Utah. To me they are sexy and I can't wait to get them on my Bronco. I bought the light bar and the ditch lights.

Never heard of them, but I’m liking this bracket.

 

[4x4TruckLEDs.com]

Never heard of them, but I’m liking this bracket.

That's not a pillar bracket...

 

[BroncoAZ]

That's not a pillar bracket...

I know, but I still like it for the mod bumper.

 

[4x4TruckLEDs.com]

I know, but I still like it for the mod bumper.

Check out our kits than - made here in the USA and (as far as I know) we are the only ones who use stainless steel for our brackets AND powder cost them (so it’s not just normal steel that can rust)

https://www.4x4truckleds.com/vehicle-specific/ford-bronco/2021-bronco/

 

[BroncoAZ]

Check out our kits than - made here in the USA and (as far as I know) we are the only ones who use stainless steel for our brackets AND powder cost them (so it’s not just normal steel that can rust)

https://www.4x4truckleds.com/vehicle-specific/ford-bronco/2021-bronco/

I’m a fan of your products and ordered some DD lights from you last month. I’m not questioning quality of your brackets, I’m sure they are great. I would like to find a bracket that doesn’t bolt to the top inside of the holes in the mod bumper.

 

[jasonf]

badassmounts.com

 

[Smheard]

I ordered these from Mountains2metal.

https://mountains2metal.com/product/bronco6g-apillardualsxs/

Got two sets of Diode Dynamics ditch lights coming from Adam @4x4TruckLEDs.com.

Sponsored