ARCHETYPE RACING | BAM-BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

[Herbie]

That is Tumbled Matte Clear.

That's what I got too, I just couldn't tell from the pic so was curious thanks Curtis. Mine is sitting in my Mod pile, waiting for my vehicle to show up.

Sponsored

 

[Smilinacura]

An order or invoice number trumps being on the list on Post 2. If you have either of those numbers, you’re golden! If not, PM me.

To be completely honest, that list went out of control. I started post 2 with a numbered list from 1-20. I thought, if we were to get 20 pre-orders for BAM rails, I’d call it a success. Needless to say, the community CRUSHED it and somewhere in the 200’s we threw in the towel and moved everything to a coupon code and checking out directly from the website, instead of a manually generated invoice. That’s the way all of the other B6G discounts have gone ever since. So much more efficient

So again, thank you to all of you for your patience and support. We’re throwing 20+ man hours a day just at processing and shipping orders. We have enough material now to get 95% of all of the BAMs out.

Our goal is to bombard USPS and UPS with white rectangular boxes on Tuesday (Monday is MLK Day) and finally have some breathing room for a day or two, until the STIRRUPS arrive from finishing. Then we’ll do it all over again!

I just have email with invoice request number 1562. Nothing after I paid which was October 21st. Where might that put me?

 

[GreenMtnBronco]

The all purpose mount you speak of is called the AR | FART (Fits All Random Things) and it's already in development.

love to see that soon
wondering if this will fit the non picatinny rails?
https://www.67d.com/collections/ford-bronco/products/series-55-track-ball

 

[ATLBronco75]

I just had surgery yesterday and the bronco patch sticks to my brace!

 

[Hossamus Prime]

Just got into the mail, putting in on after work. As an engineer I can’t tell you how much I appreciate the print.

 

[Kmcran]

put the sweet velcro bronco though - what have y'all others done with it?

I stuck my patch on the back side of the back seats. Looks pretty neat.

 

[ultima785]

Tech Bronze or natural Billet color?

the latter, or Tumbled Matte Clear as Curtis calls it.

 

[FTNBubba]

Send it

 

[EIGHTLUG]

love to see that soon
wondering if this will fit the non picatinny rails?
https://www.67d.com/collections/ford-bronco/products/series-55-track-ball

Highly unlikely.

The AR | F.A.R.T. and the rest of the line of parts like the AR | B.A.L.L.S. will all be part of the BAM, TAP, and MOSH ecosystem of supporting accessories. The 1/4-20 threaded accessories, might cross over. The rail mounted accessories will work with our smooth or Picatinny rails.

 

[GreenMtnBronco]

Highly unlikely.

The AR | F.A.R.T. and the rest of the line of parts like the AR | B.A.L.L.S. will all be part of the BAM, TAP, and MOSH ecosystem of supporting accessories. The 1/4-20 threaded accessories, might cross over. The rail mounted accessories will work with our smooth or Picatinny rails.

I realize this may have been said elsewhere, do you have a thread? or can you add to the initial post on the rail systems about these items? and when you expect to have them availalbe?

LOVE the rail system installed in my bronco, can't wait to figure out what else to mount besides my phone! keep the great stuff coming!

 

[VelocityBronco]

love to see that soon
wondering if this will fit the non picatinny rails?
https://www.67d.com/collections/ford-bronco/products/series-55-track-ball

Yes, for sure this will fit in the cut slots of the both rails offered, that is exactly what I am using. I had to get a longer bolt than the one supplied with it, its an M5, but can't remember what length I used.

 

[GreenMtnBronco]

Yes, for sure this will fit in the cut slots of the both rails offered, that is exactly what I am using. I had to get a longer bolt than the one supplied with it, its an M5, but can't remember what length I used.

can you show a pic from the drivers angle of the arm and what you have on it? thanks much!

 

[VelocityBronco]

can you show a pic from the drivers angle of the arm and what you have on it? thanks much!

Sure!

 

[Hossamus Prime]

Just got into the mail, putting in on after work. As an engineer I can’t tell you how much I appreciate the print.

installed

 

[clpray16]

Just got it in and set up, already really liking how it looks

Sponsored