What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[mikec426]

It’s just a vinyl wrap

So DIY? Not a pre-cut piece from a company?

Sponsored

 

[rootster]

So DIY? Not a pre-cut piece from a company?

No, It was done at a local shop that specializes in vinyl wraps. I suppose you could try your hand at it. It’s a 3m vinyl. I just wanted it done well, and i know the guys do good work. so, it was an automatic choice for me to let them do it

 

[adamruiz2001]

Knocked a few big things out this past weekend, ceramic tint all around, DV8 side steps, 4WP rear bumper and Baja Design pod lights.

 

[TNBadBronc]

Installed RPG perch collar lift w/ 37 BFG KM3's.

 

[Crash98]

Declared mission complete on modding my Bronco (at least for the rest of this year ). Tons of mods, but highlights are Expedition One rear bumper with tire carrier, Panda Power Module, fog lights, ditch lights, Xipex grill, Oracle light up letters, Rokblokz muf flaps, ARB twin compressor under the hood with Pressure Control Kit, Infinite Offroad rocklights, Suma Performance replacement side mirrors, Brandmotion rear view mirror/camera, white powdercoat beauty rings. Now just going to enjoy the ride and find some trails!

 

[reigny]

Added hockey stripes!

 

[Mo’ Money Mo’ Broncos]

Got this lil guy from sticker fab thrown in on my lunch break today

 

[alfiefmc]

Added rock lights for fun.

 

[Mo’ Money Mo’ Broncos]

Declared mission complete on modding my Bronco (at least for the rest of this year ). Tons of mods, but highlights are Expedition One rear bumper with tire carrier, Panda Power Module, fog lights, ditch lights, Xipex grill, Oracle light up letters, Rokblokz muf flaps, ARB twin compressor under the hood with Pressure Control Kit, Infinite Offroad rocklights, Suma Performance replacement side mirrors, Brandmotion rear view mirror/camera, white powdercoat beauty rings. Now just going to enjoy the ride and find some trails!

Congrats! Quick question, are these the XL Long mudflaps or XL regular length from rokbloks?

 

[Crash98]

Congrats! Quick question, are these the XL Long mudflaps or XL regular length from rokbloks?

I went with regular.

 

[Billnchristy]

Got the front rokblokz on.

built my own b block up front since I ordered wrong

 

[CptSamFalcon]

Installed the Apex 12k and RC mount.
All in all not bad, maybe 2-2.5 hours into it, which included fumbling around with the setup some and learning a few “this works and try that next time” things.
Parking sensor fault currently I have to work around (hopefully without having to uninstall the whole apparatus).
Not hooked up yet, as the “control pack relocation” wiring they give you isn’t long enough to reach the engine bay.
78” Warn wiring kit coming ($78 online).
More in the works over the next few months:
-RucRak
-SVC perch collars
-Pax mounts
-20lb propane tank mount
-Hammerbuilt reinforcement and accessory arm
-probable camera relocation although I hate it sticking way out there in front.
-37’s

Where did you put the control box?

 

[broadicustomworks]

Where did you put the control box?

Updates to come.
I ordered the BAMF bracket.
When it came in it is about 75% of the size it needs to be for the giant Badland control pack cover as it comes off of the APEX. And I'm not even sure that huge cover would even fit anywhere very well over on the battery side of the engine bay.
Others have implemented a smaller box and moved all of the guts out of the factory cover into it.
I will be doing the same.
The box should arrive by the end of the weekend and I'll begin swapping everything over and start installing (Install if my longer cables arrive).

I ordered two different ones, will see which one works best.

Raculety 2 Pack Project Box IP65 Waterproof Junction Box ABS Plastic Black Electrical Boxes DIY Electronic Project Case Power Enclosure 6.22"x3.54"x2.36"(158x90x60mm)) - - Amazon.com

MAKERELE IP65 Watertight Electrical Box Plastic Waterproof Dustproof Universal Electrical Project Enclosure White 5.9”×4.3”×2.8”inch(150×110×70mm) - - Amazon.com


In the end the plan is to use the BAMF, which is designed to mount on the front side of the battery tray. Should be room for both the new box and the main power cutoff switch that comes with the winch.

I'll update here once I get it all in and wired up.

A reminder to all also installing these winches: You need to unspool the rope and rewind it under load to have it nice and prepared to use when you actually need it. Per the instructions.

 

[quadruple.bogey]

Since purchase have added:
Stickerfab mudflaps
Various stickerfab overlays/inlays
Tube steps to replace rock rails since my wife is 5’0”
Black bucking horse on back
Next adding 6” Bronco script under said bucking horse

 

[quadruple.bogey]

Declared mission complete on modding my Bronco (at least for the rest of this year ). Tons of mods, but highlights are Expedition One rear bumper with tire carrier, Panda Power Module, fog lights, ditch lights, Xipex grill, Oracle light up letters, Rokblokz muf flaps, ARB twin compressor under the hood with Pressure Control Kit, Infinite Offroad rocklights, Suma Performance replacement side mirrors, Brandmotion rear view mirror/camera, white powdercoat beauty rings. Now just going to enjoy the ride and find some trails!

Sweet front grille!

Sponsored