- Thread starter
- #1
Changed my plans and now have a build scheduled. Advise would be appreciated on solid options to lift and level for 35" tires (Badlands with 7MT)
- Prefer options to retain the OME shocks
- spacer or perch collar? or combination of both
- Is there a replacement spring option like Eibach (which I purchased for what was going to be a sasquatch order and now is a none sasquatch order)
I don't plan on above 35" tires. I will add the performance tune to get torque and horsepower bumped up. Will add use Icon rebound pro wheels and goodyear sasquatch tires (so my weight is in check)
EDIT 1/26/23: The feedback I have received is the badlands Bilstein non-sasquatch strut is the same as the sasquatch strut with the difference being; the perch collar on the sasquatch is set at a different elevation 0.43" higher. The bump stop on the sasquatch is also 0.4" taller to prevent the 35" tire from contacting the wheel well at full compression. Conclusion that I make is the badlands suspension none-sasquatch can be converted to sasquatch with those two simple modification (perch collars 0.43" minimum plus add 0.4" bump stop extension)
- Prefer options to retain the OME shocks
- spacer or perch collar? or combination of both
- Is there a replacement spring option like Eibach (which I purchased for what was going to be a sasquatch order and now is a none sasquatch order)
I don't plan on above 35" tires. I will add the performance tune to get torque and horsepower bumped up. Will add use Icon rebound pro wheels and goodyear sasquatch tires (so my weight is in check)
EDIT 1/26/23: The feedback I have received is the badlands Bilstein non-sasquatch strut is the same as the sasquatch strut with the difference being; the perch collar on the sasquatch is set at a different elevation 0.43" higher. The bump stop on the sasquatch is also 0.4" taller to prevent the 35" tire from contacting the wheel well at full compression. Conclusion that I make is the badlands suspension none-sasquatch can be converted to sasquatch with those two simple modification (perch collars 0.43" minimum plus add 0.4" bump stop extension)
Sponsored
Last edited: