Badlands non-Sasquatch on 35” tires? AUTO trans

[mcinfantry]

With all the constraints I’m debating dropping Sasquatch

anyone care to speak up that’s swapped to 34.5-35” tires after driving it a while?
I will run 34.5 Mickey Thompson at in 10.00 width on Hutchinsons

just curious if I should wait, or drop sas anyway.

i can do math, understand gearing

just curious on someone doing it

Sponsored

 

[Werkedperformance]

Manual non Squatch is still 4.7 gears.

Dunno your trans choice.

I went to 315/17/17 AT3W with 1.5 spacers for control arm clearance. I could have less spacer. I may get less spacer but need to do measurements.

It rubbed metal fender twice at full articulation yesterday at full tuck. Flares were off.

My buddy has the same tire with the 1” level
Kit. He does not rub.

 

[mcinfantry]

Manual non Squatch is still 4.7 gears.

Dunno your trans choice.

I went to 315/17/17 AT3W with 1.5 spacers for control arm clearance. I could have less spacer. I may get less spacer but need to do measurements.

It rubbed metal fender twice at full articulation yesterday at full tuck. Flares were off.

My buddy has the same tire with the 1” level
Kit. He does not rub.

I added it

auto trans

 

[mcinfantry]

Manual non Squatch is still 4.7 gears.

Dunno your trans choice.

I went to 315/17/17 AT3W with 1.5 spacers for control arm clearance. I could have less spacer. I may get less spacer but need to do measurements.

It rubbed metal fender twice at full articulation yesterday at full tuck. Flares were off.

My buddy has the same tire with the 1” level
Kit. He does not rub.

Also think a 10.00 width would negate some of that rubbing?

 

[Werkedperformance]

The narrow tires may be ok without wheel spacers.

My tires are 34.6 and rub metal fender at full compression in the vertical axis. Narrow tires would still rub. Needs the leveling kit.

 

[Sardine]

The narrow tires may be ok without wheel spacers.

My tires are 34.6 and rub metal fender at full compression in the vertical axis. Narrow tires would still rub. Needs the leveling kit.

I'm looking to get these Wildpeaks in the same size and also have a stock badlands coming in.

What do you mean metal fender? Did you remove the crash bars?

What wheels are you running?

Sponsored