ARCHETYPE RACING | BAM-BYODR (Billet Aluminum Modular Bring Your Own Device Rail)

[EIGHTLUG]

When do you expect the first batch to ship?

The expedited rails will be ready and shipped to participants for SEMA. I’ll begin shipping rails the out once I’m back from SEMA. At this point, about 3.5 weeks from today.

Sponsored

 

[BroncoKong Jr.]

If you order an actual Picatinny mounted accessory, you will be able to mount 8 single point Picatinny accessories in 8 positions across the smooth rail. This also means, if they fit, you will be able to mount a maximum of 8 picatinny accessories on the entire length of the rail.

If it's a standard clamp on style device (GoPro), you can mount it anywhere across the smooth rail.

On the Picatinny rail, you have an abundance of mounting locations for Picatinny accessories. From what I've seen, there are a lot of standard accessories online that do not require Picatinny or a notch in the rail for mounting. Everything that AR will design for these rails will not have a notch that requires a Picatinny point.

At the end of the day, it really just comes down to which style you prefer. You'll be safe for mounting the accessories you want with no major issue.

Will the center slots accept a t-bolt?

Something like this:

Or is the rail Picatinny accessories only?

I'm cool either way; just curious.

Also, are there any mounting options for the feet at each end? I know Ford didn't provide anything but maybe some double-sided tape or, if necessary, screwing into the dash?

 

[MrGreen55]

This look really cool but I'm not getting a bronco for another year at this point. I rather make a shopping list out of all the sema gear everyone making then see when it will all come out.

 

[EIGHTLUG]

Will the center slots accept a t-bolt?

Something like this:

Or is the rail Picatinny accessories only?

I'm cool either way; just curious.

Also, are there any mounting options for the feet at each end? I know Ford didn't provide anything but maybe some double-sided tape or, if necessary, screwing into the dash?

Yes on the T-Bolt, similar to an M-LOK application.

I’m thinking 3/8” 3M VHB, if you’re needing extra stability for the outboard feet. Totally reversible back to stock.

 

[iamchewby]

Wait until you see the what comes out for the BAM BYODR this week. Hint: The components will emphasize the capital M for Modularity. For any other company to make something better, they’ll need to come with their A+ game.

Has the FART (AKA spicy ketchup holder) completed R&D?!?!?!

 

[EIGHTLUG]

Has the FART (AKA spicy ketchup holder) completed R&D?!?!?!

I'll be coming in hot, just behind the Billet Side Step- AR | STIRRUP

I do know there will be three sizes for the AR | FART. This much I know...

• SBD (small)
• Crop Duster (medium)
• Shart (large)

 

[EIGHTLUG]

Does it matter that like 60 people were added to the list between when I paid and when I was added?

No. We will have 250 available to ship by early Nov., as long as you are paid and under that number, you're good!

 

[EIGHTLUG]

Well that and that I was added 4 days after I paid lol

The help has been slackin!

 

[Jim Walter]

SEND IT

 

[FloridaBeachBronco]

Send it!!!

And PM address

 

[BroncoBoy22]

I'll be coming in hot, just behind the Billet Side Step- AR | STIRRUP

I do know there will be three sizes for the AR | FART. This much I know...

• SBD (small)
• Crop Duster (medium)
• Shart (large)

the STIRRUP!!! I’ve died and gone to Bronco Heaven!! SEND IT!!!

Can’t wait to buy 4 of those bad boys!!

 

[DubC]

I'll be coming in hot, just behind the Billet Side Step- AR | STIRRUP

I do know there will be three sizes for the AR | FART. This much I know...

• SBD (small)
• Crop Duster (medium)
• Shart (large)

Cannot wait for the STIRRUP! I just picked up my Bronco this past Saturday and I currently have a sprained ankle. It’s a bitch getting in and out of the Bronco at the moment especially since it’s squatched.

 

[Daktari]

so over on BN BrianBell66 (whom I assume either works for 4WP or has maybe a preproduction model) posted a picture of their rail... Have to say, I still like the AR Rail better... seems more... solid/secure than this one....

definitely looks better and that giant white 4WP glaring at me in the sun would bug me no end.
Also seems to be some slide in rail system? So if you want to change what's in the middle you have to take everything else off? And that big triangle foot is a waste of space, unless you can attach things there too.

I'm waiting until I have things I actually want to mount there, I prefer my gopro on the outside of the truck, but this one I'd not consider. Looks a bit flimsy too.

 

[Jim Walter]

SEND IT

Payment sent
thanks
Jim

 

[tjparisi]

SEND IT

Sponsored