Additional Key Fob

[paperboy]

All good now. Funny how your brain works. I had my wife read through the instructions and she understood them a different way - and it worked (I was doing each key twice duh....)

Working now.

Cheers.

Sponsored

 

[BigTim55]

is there a way to program an extra fob without two fobs? i lost one fob but was given one from a totaled bronco

 

[Ducati1098]

is there a way to program an extra fob without two fobs? i lost one fob but was given one from a totaled bronco

Only a dealer can do that. And probably some locksmiths.

 

[GMC]

Anyone know the OE part number for a 2024, 3 button, 315Mhz? Ford parts says the M2DZ15K601A does not fit 2024. The only one they list for a 2024 is M2DZ15K601C but it's a 4 button for use with 315/902 Mhz.
Engineering number on mine is M2DT-15K601-AB if it helps. Thanks.

 

[Ducati1098]

Anyone know the OE part number for a 2024, 3 button, 315Mhz? Ford parts says the M2DZ15K601A does not fit 2024. The only one they list for a 2024 is M2DZ15K601C but it's a 4 button for use with 315/902 Mhz.
Engineering number on mine is M2DT-15K601-AB if it helps. Thanks.

M2DZ-15K601-A is the correct part number.

 

[GMC]

M2DZ-15K601-A is the correct part number.

Thank you.

 

[pharden]

When you are programming the keys does it say anything on the dash? I've tried three times with no luck.

 

[Sunday Money]

When you are programming the keys does it say anything on the dash? I've tried three times with no luck.

When I programmed a 3rd fob there was a confirmation message on the dash, but it only lasted a couple seconds. Here's my programming post from a few months ago.

https://www.bronco6g.com/forum/threads/3rd-key-fob-programming-key-blade-cutting-summarized.94744/

 

[pharden]

When I programmed a 3rd fob there was a confirmation message on the dash, but it only lasted a couple seconds. Here's my programming post from a few months ago.

https://www.bronco6g.com/forum/threads/3rd-key-fob-programming-key-blade-cutting-summarized.94744/

Thanks, I'll try it again

 

[TLO]

I have an extra fob from myaat Bronco.... Obviously already programmed. What's the procedure for programming it?

 

[Callelk]

I can't seem to get mine to do anything when I try to program.

 

[HolidayDog]

I can't seem to get mine to do anything when I try to program.

Keep trying. Mine worked after 20+ tries. I reread the directions 100s of times, fob in the slot pointing forward backward, buttons up and down, slow count, fast count. You will eventually get it.

 

[BroncoSurfer]

I agree. I kept trying and eventually it worked. The 4th key fob worked on the first try. I guess the first 10+ failures were required practice runs.

 

[mmorgan]

For me, performing EVERY STEP in less than 30 seconds was the reason I had to repeat the programing several times. With the number of steps required, those 30 seconds pass quickly.
Set you phone timer up so you can see it and watch the 30 second window. If you don't finish in less than 30, programming will fail.

It's not hard to understand why many people get fast enough after 5-10 attempts they get fast enough!

 

[CalvinT]

It took me several tries. The manual doesn't really tell you that you have to use the newly programmed key to start your Bronco for the programming to take.

Sponsored