AR | STIRRUP® OEM Rail Fitment, Billet Aluminum Side Step - Brongo6G Exclusive Part

[Ironiguana]

AR | STIRRUP

The BRONCO community asked for it and we went to work! After reviewing what was shared from last year's SEMA Bronco, there was plenty of room for improvement, both in design and function.

Made from a sizeable chunk of 6061 billet, the STIRRUP is very beefy part and it will look right at home on an overland build, trail conquering rig, or your daily driver. It's five inches of width will give your boot or shoe a proper platform to assist you in climbing up in the saddle. The entire part is coated in RAL 9011 Graphite Black, then post machined to remove the coating from the top surface and reveal the raw billet aluminum and provide a very classy contrast. This will also give the STIRRUP years and years of rugged good looks. The more you step on the the more naturally worn the aluminum will look but it won't affect the Graphite Black coating.

The STIRRUP is mounted to your OEM rocker rail with M8 and M10 316 stainless fasteners. A single M8 bolt alone has 110,000 PSI tensile strength! The STIRRUP is definitely more solid than the rail it's mounted to. With its coating and the use of aluminum and stainless, the STIRRUP will require little maintenance and it will last the life of your Bronco.

The STIRRUP will be sold in pairs. This will also be a BRONCO6G exclusive part, at launch, and B6G members will always be eligible for the 20% discount. We're going to handle the purchasing a little differently this time....

Pricing:

Retail price for the AR | STIRRUP is $494.43

BRONCO6G members are eligible for a 20% discount, making the price per pair: $395.55

NOW TO THE FUN PART:

If you would like to pre-order your STIRRUP pair or set of four now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website.

3. Go to the link, also provided in the PM, to the STIRRUP, and you'll be able to check out with the BRONCO6G 20% discount.

4. Spam F5 on the tracking link, once you have it, while you're waiting for your STIRRUPS to arrive.
View attachment 194217 View attachment 194216
View attachment 192340 View attachment 192341

Send it!

Sponsored

 

[aniljavali]

SEND IT

 

[STX Bronco]

More colors and angles are being worked on now. Here's what I have to share today.

In my very humble opinion, they are just the right amount of poke. There's enough there to look rugged and utilitarian but not so much that it looks like the first step of a metro bus. Not wider than the factory stance or the mirror caps, so we don't have any 'Dumbo' effect.

I'll also get Post 1 updated with the retail and BRONCO6G price now. The STIRRUP will also be live on the website this evening.

The official time to SEND IT has begun!

Now do 2D Cactus Gray.

 

[JetG]

SEND IT!

 

[threeonone]

SEND IT!

But only if you have shipping to Canada and you've got some magic to work on duties across the border

Edit: It's been 2 minutes since I posted this - Why the heck aren't these at my door step yet??!

If these are manufactured in USA then NAFTA should apply which makes them duty free. Should only have to pay sales tax in your province.

 

[corey07]

Yup. SEND IT!!!

 

[EIGHTLUG]

Crap I just realized I need to send it to get the link.

Send it!

I got you, bytheway!!
Done

 

[EIGHTLUG]

I

Now do 2D Cactus Gray.

It's happening.

 

[BroncoBuckaroo]

So make sure I get this right, by clicking 2 you are getting 4 stirrups...I have a 4 door

 

[BdubBronco]

Send it

 

[EIGHTLUG]

So make sure I get this right, by clicking 2 you are getting 4 stirrups...I have a 4 door

Correct. They are shipping in pairs.

 

[littlepope]

send it!

 

[scotts418]

AR | STIRRUP

The BRONCO community asked for it and we went to work! After reviewing what was shared from last year's SEMA Bronco, there was plenty of room for improvement, both in design and function.

Made from a sizeable chunk of 6061 billet, the STIRRUP is very beefy part and it will look right at home on an overland build, trail conquering rig, or your daily driver. It's five inches of width will give your boot or shoe a proper platform to assist you in climbing up in the saddle. The entire part is coated in RAL 9011 Graphite Black, then post machined to remove the coating from the top surface and reveal the raw billet aluminum and provide a very classy contrast. This will also give the STIRRUP years and years of rugged good looks. The more you step on the the more naturally worn the aluminum will look but it won't affect the Graphite Black coating.

The STIRRUP is mounted to your OEM rocker rail with M8 and M10 316 stainless fasteners. A single M8 bolt alone has 110,000 PSI tensile strength! The STIRRUP is definitely more solid than the rail it's mounted to. With its coating and the use of aluminum and stainless, the STIRRUP will require little maintenance and it will last the life of your Bronco.

The STIRRUP will be sold in pairs. This will also be a BRONCO6G exclusive part, at launch, and B6G members will always be eligible for the 20% discount. We're going to handle the purchasing a little differently this time....

Pricing:

Retail price for the AR | STIRRUP is $494.43

BRONCO6G members are eligible for a 20% discount, making the price per pair: $395.55

NOW TO THE FUN PART:

If you would like to pre-order your STIRRUP pair or set of four now, here's what you'll need to do.

1. Reply in this thread: SEND IT!

2. We will PM you with a one time use code for the ARCHETYPE RACING website.

3. Go to the link, also provided in the PM, to the STIRRUP, and you'll be able to check out with the BRONCO6G 20% discount.

4. Spam F5 on the tracking link, once you have it, while you're waiting for your STIRRUPS to arrive.
View attachment 194217 View attachment 194216
View attachment 192340 View attachment 192341

SEND IT

 

[orange_methodology]

SEND IT!!!

 

[migsby_carmichael]

anybody's discount code not working for them either?

Sponsored