SEND ITAR | BAM BYODR (Billet Aluminum Modular Bring Your Own Device Rail)
** Please be advised that Graphite Black Picatinny is 5-8 week lead time. Our next shipment should arrive from anodizing by 2/21/22.** These orders will be filled ASAP.
** For questions about your order, email: [email protected] and we will get back to you, ASAP.
Here are your saucy renders and photos of the three standard colors on the two rail designs. We have Picatinny available in Graphite Black, Tech Bronze, and Tumbled Matte Clear.
$275.00 shipped. BRONCO6G members will get 20% off ($220)!
Here's what you'll need to do to have your mailman drop one off on your doorstep:
Step 1: Reply to this thread with 'SEND IT'
Step 2: I'll reply, via PM, with the exclusive Bronco6G 20% off coupon code. Copy and paste the coupon code when you checkout. This is also a way to grow the Bronco6G community and drive traffic to the website. This offer will also be available to all existing and new BRONCO6G members.
Step 3: Sit back and wait. Your AR | BAM will be there before you know it!
-Smooth Rail Option-
There's also the smooth rail option. Same colors are available.
Graphite Black, Tech Bronze, and Tumbled Matte Clear.
Being that the entire unit is modular, you'll be able to order one rail smooth and one rail Picatinny, if you so desire. In the end, it was just easier to produce the two rails separately. As always, we appreciate the support!
AR | BAM BYODR (Billet Aluminum Modular Bring Your Own Device Rail)
** Please be advised that Graphite Black Picatinny is 5-8 week lead time. Our next shipment should arrive from anodizing by 2/21/22.** These orders will be filled ASAP.
** For questions about your order, email: [email protected] and we will get back to you, ASAP.
Here are your saucy renders and photos of the three standard colors on the two rail designs. We have Picatinny available in Graphite Black, Tech Bronze, and Tumbled Matte Clear.
$275.00 shipped. BRONCO6G members will get 20% off ($220)!
Here's what you'll need to do to have your mailman drop one off on your doorstep:
Step 1: Reply to this thread with 'SEND IT'
Step 2: I'll reply, via PM, with the exclusive Bronco6G 20% off coupon code. Copy and paste the coupon code when you checkout. This is also a way to grow the Bronco6G community and drive traffic to the website. This offer will also be available to all existing and new BRONCO6G members.
Step 3: Sit back and wait. Your AR | BAM will be there before you know it!
-Smooth Rail Option-
There's also the smooth rail option. Same colors are available.
Graphite Black, Tech Bronze, and Tumbled Matte Clear.
Being that the entire unit is modular, you'll be able to order one rail smooth and one rail Picatinny, if you so desire. In the end, it was just easier to produce the two rails separately. As always, we appreciate the support!
AR | BAM BYODR (Billet Aluminum Modular Bring Your Own Device Rail)
** Please be advised that Graphite Black Picatinny is 5-8 week lead time. Our next shipment should arrive from anodizing by 2/21/22.** These orders will be filled ASAP.
** For questions about your order, email: [email protected] and we will get back to you, ASAP.
Here are your saucy renders and photos of the three standard colors on the two rail designs. We have Picatinny available in Graphite Black, Tech Bronze, and Tumbled Matte Clear.
$275.00 shipped. BRONCO6G members will get 20% off ($220)!
Here's what you'll need to do to have your mailman drop one off on your doorstep:
Step 1: Reply to this thread with 'SEND IT'
Step 2: I'll reply, via PM, with the exclusive Bronco6G 20% off coupon code. Copy and paste the coupon code when you checkout. This is also a way to grow the Bronco6G community and drive traffic to the website. This offer will also be available to all existing and new BRONCO6G members.
Step 3: Sit back and wait. Your AR | BAM will be there before you know it!
-Smooth Rail Option-
There's also the smooth rail option. Same colors are available.
Graphite Black, Tech Bronze, and Tumbled Matte Clear.
Being that the entire unit is modular, you'll be able to order one rail smooth and one rail Picatinny, if you so desire. In the end, it was just easier to produce the two rails separately. As always, we appreciate the support!
I did my setup like this. You can actually run the wires between the dash and the windshield. There is some foam there that is really easy to tuck the wires under. I will try to get some better pictures about what I'm talking about tomorrow. I still want to come up with a better mount I just modified the midland bracket to work with two picatinny rail clamps.Has anyone mounted their GMRS radio on the rail? What did you do with your wires? Trying to brainstorm, but but not seeing a lot of options on the dash (other than through the speaker?).
Awesome. That’s good to know. I have the same 2 rail clamp system set up, but have been looking for a wiring solution. Didn’t know about the foam near the windshield. Would love to see more photos if you have them.I did my setup like this. You can actually run the wires between the dash and the windshield. There is some foam there that is really easy to tuck the wires under. I will try to get some better pictures about what I'm talking about tomorrow. I still want to come up with a better mount I just modified the midland bracket to work with two picatinny rail clamps.
i accidnetally ordered picatinny when i wanted smooth and didnt notince until i received it. it seems like nothing i have is working to mount stuff. i i had ordered 67 designs series 55 balls but they wont fit due to the rails being higher. so i spent 42 bucks on the smallrig nato clamp that has 6 different thread holes but none in the size i need. leaving on a trip for big bend tomorrow and the only thing i've been able to successfully mount is my go pro since i havent had time to order stuff that fits it due to time constraints for when i installed vs when i leave on the trip. build quality is awesome and it is an awesome product, but i would go with smooth and i already ordered another.So stuck on whether I should get the smooth or picatinny graphite black for my tech bronze dash. Any suggestions?
Nice setup!I did my setup like this. You can actually run the wires between the dash and the windshield. There is some foam there that is really easy to tuck the wires under. I will try to get some better pictures about what I'm talking about tomorrow. I still want to come up with a better mount I just modified the midland bracket to work with two picatinny rail clamps.
I would like to buy it. Does it fit a base dash?i accidnetally ordered picatinny when i wanted smooth and didnt notince until i received it. it seems like nothing i have is working to mount stuff. i i had ordered 67 designs series 55 balls but they wont fit due to the rails being higher. so i spent 42 bucks on the smallrig nato clamp that has 6 different thread holes but none in the size i need. leaving on a trip for big bend tomorrow and the only thing i've been able to successfully mount is my go pro since i havent had time to order stuff that fits it due to time constraints for when i installed vs when i leave on the trip. build quality is awesome and it is an awesome product, but i would go with smooth and i already ordered another.
someone hit me up if you want to buy a black picatinny